Yale 7110P SecureX Electric Latch Retraction Fire Surface Vertical Rod Exit Device

• Designed for wide stile and flush doors
• Handed. Specify hand (field reversible)
• Bottom deadbolt for secure latching
• Fully adjustable roller strike
• Applications: Pairs of doors, Double egress, Metal, wood or composite door materials
• Door Opening Height: Standard door height 7' (213cm), with the device centerline at 39-15/16" (101cm) from floor.
• Door Thickness: 1-3/4" (44mm) standard
• Minimum Stile Width: 4-1/2" (114mm)
• Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged
• Latchbolt: Top: 3/4" (19mm) throw, pullman-type with automatic deadlatching Bottom: 5/8" (16mm) throw deadbolt, held retracted during door swing
• Vertical Rods: 1/2" O.D. tubular brass, bronze or stainless steel with rod guides
• Strike: Top: Roller type 791. Bottom: Flush mounted 790. 794 floor strike optional (threshold openings).
• Fasteners: Machine screws and wood door fasteners standard for panic hardware.
• Trims: 620F series escutcheon trim, 630F series pull/thumbpiece trim, 680F series offset pull trim,
540F series rose trim.
• Available in Satin Stainless Steel 630 finish

Operation

• Allows the latchbolt to be retracted electrically for momentary or maintained periods of time from a remote location. Device bolts remain retracted (push/pull) for as long as the device is energized. Removal of power returns the device to the life safety, self-latching mechanical mode. Easy interface with central or local fire alarm systems, automatic door operators, and access control systems. Allows free egress at all times. Manual hex key dogging standard on non-rated devices.

Electrical Specifications

• Solenoid Assembly, Continuous duty
• 5.5 volt solenoid with a 36-volt holding magnet (.172 amp seated)
• 9 amp inrush
• Requires a 4-wire minimum pivot or hinge to transfer power from frame to door.
• Requires the 781N controller for operation (USING ANY OTHER POWER SUPPLY VOIDS THE WARRANTY OF THE DEVICE.)