Von Duprin EL3327A-EO Exit Only Electric Latch Retraction Surface Mounted Vertical Rod Device

• Device ships EO (Exit Only)
• Strikes Top – 266 – Dull Black, Bottom – 248L4 & 304L – Unfinished
• EL Electric Latch Retraction
• Fasteners & Includes 1 3/4" (44mm) – 2 1/4" (57mm) Wood & Metal Doors
• Sex Bolts (SNB) #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device #325 SNB furnished for top and bottom latches)
• Latch Bolt Deadlocking Anti-friction Top & Bottom Bolt 5/8" (16mm) throw
• Device Centerline from 39 5/8" (1006mm)
• Finished Floor
• Door Undercut 1/4" (7mm)
• Center Case Dimensions 8 3/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm)
• Mechanism Case Dimensions 2 1/4" x 2 1/4" (57mm x 57mm)
• Top and Bottom Latch 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
• Vertical Rods 1/2" square tubing, standard rods accommodate 7’(2134mm) door
• Top rod length is 34 15/16” (887mm) Bottom rod length is 31 1/4"(794mm)
• Projection Pushbar Neutral – 3 13/16" (97 mm)
• Pushbar Depressed – 3 1/16" (78 mm)
• Finishes: Brass, Polished US3 605, Brass, Dull US4 606,Bronze, Dull US10 688, Chromium, Polished US26 625, Chromium, Dull US26D 626, Anodized, Aluminum US28 628, Anodized Duranodic (Dark Bronze) 313AN 710 and Anodized Black 315AN

Electric Latch Retraction (EL)

• The EL feature allows for the remote unlatching of exit devices.
• A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation.
• A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time.
• The EL feature is an alternative to manual dogging.
• EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
• UL approved for Class II circuit applications.
• The EL option does not include the power transfer from door to frame, the power supply, or the control operator.
• Refer to EPT-2 power transfer and the PS914 power supply.

Solenoid Specifications:

• Continuous Duty –– 24 VDC
• Current Inrush –– 16 Amps
• Current Holding –– 0.3 Amps