• Application: Multi-family dwellings, hotel/motel, office and light duty commercial use.
• Simultaneous retraction of deadbolt and latch for single-motion egress.
• Independent heavy duty torsion springs.
• Handicap compliant levers.
• Patented reinforcer for deadbolt strike in wood frame to withstand kicking and prying.
• Free-spinning steel-reinforced collar protects deadbolt cylinder from wrenching.
• Lever Design: Jupiter
• Finish: 626 Satin Chromium Plated
|Lock Functions||S210PD - Entrance, Single Locking - Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latchbolt retracted by lever from either side. Turning inside lever retracts deadbolt and latchbolt simultaneously for immediate exit.|
|Door Thickness||1-3/8" to 2" (35 mm-51 mm)|
|Backset||2-3/8 ̋ (60mm) standard|
|Case||Steel, zinc dichromate plated for corrosion resistance|
|Keying/Keyways||Prepared for full size interchangeable core, less core|
|Latchbolt||Brass, chrome plated, 1/2˝ (13mm) throw, deadlocking|
|Deadbolt||1" (25mm) throw stainless steel deadbolt is standard|
|Faceplates/Armor Fronts||Steel. 1-1/8˝ x 2-1/4˝ (29mm x 57mm) square corner, beveled, for 2-3/4˝ backset standard|
|Exposed Trim||Levers are zinc based, plated to match finishes indicated. Roses, escutcheons, latch faceplates, strikes are wrought brass or bronze|
|Strikes||T-strike 1-1/8" x 2-3/4" (29mm x 70mm) x 1-1/8" (29mm) lip to center with box standard|
|Compliances||Federal: Meets FF-H-106C|
|U.L. Listed||UL / ULC All locks listed for A label single doors, 4´ x 8´. Letter F and UL symbol on latch front indicate listing|
|CA State Fire Marshal||All levers with returns comply; levers return to within 1/2˝ of door face.|
|ANSI/BHMA||Meets or exceeds A156.12 Series 4000, Grade 2 strength and operational requirements|
Write Your Own Review
Questions on Schlage S210JD-JUP-626 Entrance Single Locking Interconnected Lock Prep For FSIC (Less Core)
No questions asked yet