• Simultaneous retraction of deadbolt and latch for single-motion egress.
• Patented reinforcer for deadbolt strike in wood frame to withstand kicking and prying.
• Free-spinning steel-reinforced collar protects deadbolt cylinder from wrenching.
• 1˝ throw deadbolt with hardened steel roller resists sawing.
• No exposed mounting screws.
• Handle Design: Plymouth.
• Satin Chromium Plated 626 Finish
|Lock Functions||H180 - Storeroom Lock - Deadbolt operated by key from outside or thumbturn inside. Bolt automatically deadlocks when fully thrown. Deadlatch retracted by key from outside. Inside knob retracts both latch and deadbolt simultaneously for immediate exit. Outside knob is always locked.|
|Door Thickness||1-3/8" to 1-3/4" (35 mm-44 mm)|
|Backset||2-3/8" (60 mm) standard, 2-3/4" (70 mm) and 5" (127 mm) optional.|
|Case||Steel, zinc dichromate plated for corrosion resistance|
|Keying/Keyways||6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, C123 keyway, keyed different (KD), upper and lower cylinders are keyed alike|
|Latchbolt||Brass, chrome plated, 1/2˝ (13 mm) throw, deadlocking|
|Deadbolt||1" (25 mm) throw with hardened steel roller, and 1" (25 mm) housings standard|
|Faceplates/Armor Fronts||Brass or bronze. 1-1/8˝ x 2-1/4˝ (29 mm x 57 mm) square corner, beveled, for 2-3/4˝ (70mm) backset standard|
|Exposed Trim||Knobs, roses, escutcheons, latch faceplates and strikes are wrought brass or bronze. Levers are zinc base, plated to match finish symbols.|
|Strikes||T-strike 1-1/8˝ x 2-3/4˝ x 1-1/8˝ (29 mm x 70 mm x 29 mm) lip to center with box standard|
|Mode of Operation||N/A|
|U.L. Listed||All locks listed for A label single doors, 4´ x 8´. Letter F and UL symbol on latch front indicate listing|
Write Your Own Review
Questions on Schlage H180-PLY Storeroom Interconnected Lock w/ Standard Keyed Cylinder
No questions asked yet