Sargent 10G71 Line Electro-Mechanical Cylindrical Lever Lock (Standard Cylinder)

• For Doors - 1-3/4" (44mm) to 2" (51mm) thick doors
• Backset – 2-3/4” (70mm) standard, optional 2 3/8” (60mm) backset w/ 1” wide front
• Bored Housing – Steel, zinc dichromate finish
• Front – Wrought brass, bronze or stainless steel 2-1/4” x 1-1/8” (57mm x 29mm) fixed bevel
• Strike – Wrought brass, bronze or stainless steel, 4 7/8” ANSI 808 curved lip strike standard
• Roses – Heavy wrought brass and bronze
• Latch – Stainless steel bolt 1/2” (13mm) throw
• Cylinder – Brass, 6 pin, LA keyway standard, Keys – Two, nickel silver
• Door Prep – 161 Door Prep Modified, Minimum Stile – 4-1/2” (114mm)
• Templates - Electromechanical bored lock templates are required for this lockset
• Electrical Voltage - 24VDC Regulated
• Current - .25A at 24VDC Multiple units using one power supply, should be wired in parallel
• Solenoid - UL approved. Designed for both intermittent and continuous duty
• Incorporates into alarm systems or in conjunction with an electromagnet
• Electromechanical (Fail Secure) Power on locks outside lever, Deadlocking latch, Latch retracted by key outside when locked electrically, Inside lever always free
• Provided with ElectroLynx™ 8 Pin Connector
• Positive Pressure – Meets UL 10C and UBC 7-2 (1997)
• ADA – All levers conform to ADA requirement for barrier-free accessibility
• California Code – Levers (L, J & P) conform to California Administrative Code Title 19 and 24
• Trim Standard: B, L, J & P Levers
• Finishes – 3 Bright Brass, Clear Coated (BHMA 605) , 4 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612) , 10B Dark Oxidized Satin Bronze, Oil Rubbed (BHMA 613), 26 Bright Chrome Plated (BHMA 625) , and 26D Satin Chrome Plated (BHMA 626)