Norton 6950 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator

• Ease of installation and setup
- Simple instructions
- Uses push-button settings for door open and door close positions
• Application versatility and ease of adjustment
- Handed units
- Pull-side mounting
- Interfaces with electric hardware and integrates with access control systems
• Operates as mechanical surface closer during close cycles or if power is turned off
- Critical for fire-rated doors
- Spring force provides the feel of a normal manual door closer
- Door can be opened manually if desired
• Operation startup options
- Wall switches
- Motion sensor
- Radio frequency device
- Push and Go
• Hold Open options
- 0-30 seconds (5 seconds minimum required for ADA and ANSI A156.19)
- Choice of indefinite hold open features
• Obstruction Detection
- Door closes if it hits an obstruction while opening
- Door re-opens once if it hits an obstruction while closing
• Power Operator
- When unit is activated door travels to open position
• Power Assist
- When unit is activated, pump and motor allow door to be manually opened with a force less than 5 lbs.

Operator Type Safety Equipment Required to be BHMA Compliant Common Applications

• Low Energy Signage (included with unit) for (Low to Moderate Traffic) Executive Offices, ADA Dorm Rooms, ADA Hotels, Retirement Homes,Educational or Assisted Living Facilities, Office/Warehouse Corridor Doors, ADA Auxiliary Entrances, ADA Accessible Restrooms, Fire Doors

Features

• Norton 7500 series door closer
- Adjustable spring power
- Backcheck valve
- Backcheck position valve
- Sweep valve
- Latch valve
- Speed control valve
- Pressure adjustment valve
• Left or right hand
• Drop plate for low ceiling applications
• Push-side or pull-side applications
• Power Assist selector switch
• Push and Go selector switch
• Open/close obstruction detection
• Motor startup delay adjustment
• Vestibule function delay adjustment (For sequencing two or more units)
• Door hold open delay adjustment
• Single Pole Double Throw (SPDT) relay output
• SPDT relay output time adjustment
• SPDT alarm output
• Blow open function for smoke ventilation
• Indefinite hold open function
• Presence detector input
• 24 VDC @ .5A output
• Selector mode switch (3 position)
- OFF – Disables signal inputs except blow open. Unit still powered.
- ON – Activates signal inputs for normal use
- HOLD OPEN – Activates the unit to the hold open position indefinitely

Electrical Data

• Power input 120 VAC, 60 Hz (+10%, -15%)
• Current draw 1.5A
• Auxiliary output 24 VDC @ .5A
• SPDT relay output for controlling electric strikes or electric locks not to exceed 1 amp @ 30 VDC