(800) 825-7848

You have no items in your shopping cart.

Norton 5910-RF1-689 Hinge Pull Side Of Door Low Energy Door Operator w/ Radio Frequency

Be the first to review this product

The Norton 5910-RF1 is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5910-RF is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc

Availability: In stock


Free Ground Shipping on domestic orders over $200

Priority orders placed before 12PM PST will be shipped the same day. Standard orders will be shipped within 24 hours.

Most items (excluding special orders) can be returned or exchanged within 30 days. Please see our Return Policy for more details.

Have Questions? Chat with us at the bottom of the screen or call us at (888) 209-8167

Frequently Bought Together

Product Description


• Ease of installation and setup
- Simple instructions
- "One touch" programming
• Application versatility and ease of adjustment
- Non-handed units
- Pull-side mounting
- Interfaces with electric hardware
- Integrates with access control system
• Includes radio frequency device
• Operation startup options
- Wall switches
- Motion sensor
- Push and Go
• Presence Detector input
• Sync cable for double doors; synchronizes closing of two operators
• Finish: Aluminum 689


• Power Assist
– When unit is activated, it allows the door to be opened manually with a force less than 5 lbs.
• Push and Go (selectable)
– As the door is manually opened, the operator “senses” movement and opens door to the full-open position.
• Obstruction Detection
– Open: Door closes if it hits an obstruction while opening
– Close (Stop on Stall): Door will stop once it hits an obstruction and rest against the obstruction until obstruction is removed
• Motor Startup Delay
– Delays operator opening
• Infinite Hold Open
– Door will hold open at set position until power is turned off
• Power Latch (selectable)
– Increases latch power
• Selector mode switch (3 position)
– Off - Disables signal inputs
– On - Activates signal inputs
– Hold Open - Activates the unit to the hold open position

Electrical Data

• Power input 120 VAC, 60 Hz (+10%, -15%)
• Current draw .75A
• 12VDC @ .5A output, 24VDC @ .25A output, 24VDC @ .4A output

Mounting Applications

• 5910 Hinge (Pull) Side of Door 5910 Rigid Arm and Slide Track
• Buffered stop assembly in slide track
• 85° to 110° templated door openings in 5° increments
• 1/8" (3mm) maximum frame reveal An auxiliary stop is suggested where severe conditions exist.

Additional Information

Additional Information

Manufacturer Norton Door Controls
Model 5910-RF-689
Dimensions 31-5/8" W x 5" H x 4-3/4" D
Size Minimum Door Width: 32" (81cm); Maximum 48" (122cm)
Mounting Hinge Pull Side
Hand Non-Handed
Input Voltage 120 VAC, 60 Hz (+10%, -15%)
Output Voltage 12VDC @ .5A output, 24VDC @ .25A output, 24VDC @ .4A output
Certifications Americans with Disabilities Act (ADA)
U.L. Listed UL325 Certified
UL10C Certified
ANSI/BHMA ANSI/BHMA A156.19 certified
Warranty 2 Year Warranty
Weight 30.0000


Write Your Own Review

You're reviewing: Norton 5910-RF1-689 Hinge Pull Side Of Door Low Energy Door Operator w/ Radio Frequency

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

Questions on Norton 5910-RF1-689 Hinge Pull Side Of Door Low Energy Door Operator w/ Radio Frequency

No questions asked yet

Ask Your Own Question