Norton 5610-RF Pull Side Of Door Low Energy Door Operator w/ Radio Frequency

• Pull side mounting
• Quiet operation
• Electrically controlled backcheck, sweep and latch
• Activation options: wall switches, radio frequency devices
• Ease of installation and set-up
• On/Off Switch
• Hold open options: 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
• Onboard 24VDC (1.1A) power supply for accessories
• Door closer mode for manual usage
• Electronic motor dampening - provides feel of normal, manual door closer
• Electric hardware and access control interface
• Optional AC power cord
• Finishes: Aluminum 689 and Statuary Bronze 690

Functions

• Push & Go
- As the door is manually opened, the operator "senses" movement and opens door to the full-open position.
• Obstruction Detection
- Motor stops if door is obstructed during opening
• Motor Start Delay
- 0-5 second delay to allowing locking hardware to release first
• Overload Safety Shut-Off
- After two minutes of receiving a door activation signal, the inverter will time out
- Prevents motor/inverter damage

Electric Data

• Power Input; 120 VAC, 60Hz
• Current Draw: .6A
• Relay Output: SPDT
- Normally Open/Normally Closed (jumper)
- For electric strike function