Multi-Door Access
Multi-Door Access consists of access control systems, communication interfaces, door controllers, delayed egress systems, and software related to multi-door systems applicable for use on single or multiple doors.
-
Alarm Lock 715 Stand Alone Delayed Egress Panic Lock
Alarm Lock 715 Stand alone delayed egress panic lock. 15 second delayed latch, instant alarm. Instant egress in case of emergency or fire. Meets NFPA 101 Life Safety Code. Includes monitoring output for secondary siren , CCTV or remote monitoring. Smoke detector input. Learn More$528.75 -
Alarm Lock AL-DTMIII Audit Trail Accessory Transfer Module
Alarm Lock AL-DTMIII Audit Trail Accessory Transfer Module for Trilogy Locks. Learn More$258.29 -
Alarm Lock AL-IM80211 Trilogy Networx Hardwire/Wireless Gateway Interface Module
Trilogy Networx Locks communicate wirelessly via Ethernet or 802.11B/G for a comprehensive wireless networked door access control system, eliminating door-to-door programming and audit trail retrieval and providing all standalone Trilogy lock functionality plus new network-wide global emergency lockdown/unlock commands Learn More$465.75 -
Alarm Lock AL-IME Trilogy Networx Hardwire Gateway Interface Module
Up to 50 wall or ceiling-mountable, compact gateway modules can be used per account and are available in hardwired version Learn More$336.88 -
Alarm Lock AL-IMEPOE Trilogy Networx Hardwire Gateway Interface Module + POE
AL-IMEPOE Hardwire Gateway Interface Module + POE Learn More$405.63 -
Alarm Lock AL-IR1 Audit Trail Infrared Printer
Alarm Lock Audit Trail Infrared Printer for Trilogy Locks. Learn More$299.85 -
Alarm Lock AL-PCI2 Trilogy Audit Trail RS-232 Interface Cable
Alarm Lock AL-PCI2 Trilogy Audit Trail RS-232 Interface Cable interconnects lock and PC for data transfer. Learn More$73.13 -
Alarm Lock AL-PCI2U Audit Trail USB Interface Cable
Alarm Lock Trilogy Audit Trail USB Interface cable interconnects lock and PC for data transfer. Learn More$136.56 -
Alarm Lock NETDKPAK Networx Wireless PIN Code Keypad
NETDKPAK26D Complete 2-Door NetPanel System with 1 DK wireless keypad, 26D finish. Includes 12 volt power supply, onboard bidirectional radio, 4Ah/12V rechargeable backup battery and plug in AC transformer. (System requires use of one of the AL-IM Series Gateway Modules, separately purchased.) Learn More$765.00 -
Alarm Lock NETPDKPAK Networx Wireless Prox/PIN Code Keypad
NETPDKPAK26D Complete 2-Door NetPanel System with 1 PDK wireless keypad with built in HID Prox Reader, 26D finish. Includes 12 volt power supply, onboard bidirectional radio, 4Ah/12V rechargeable backup battery and plug in AC transformer. (System requires use of one of the AL-IM Series Gateway Modules, separately purchased.) Learn More$1,001.25 -
Alarm Lock NETWORXPANEL Networx Wireless Control Panel Only
NETWORXPANEL NetPanel includes 12 volt power supply, onboard bidirectional radio, 4Ah/12V rechargeable backup battery and plug in AC transformer. (System requires use of one of the AL-IM Series Gateway Modules, separately purchased.) Learn More$540.00 -
Altronix ACM4 Access Power Controller
Altronix ACM4 unit converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs. Learn More$70.97 -
Altronix ACM8 Access Power Controller
Altronix ACM4 is UL Listed Sub-Assembly multi-output Access Power Controller which converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. Learn More$94.63 -
Altronix AL400ULACM Power Supply/Charger w/ Multi-Output Access Power Controller
The Altronix AL400ULACM converts a 115VAC 60Hz input into eight (8) independently controlled power limited fuse protected Fail-Safe and/or Fail-Secure outputs with a total of 12VDC @ 4 amp or 24VDC @ 3 amp of continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs Learn More$232.05 -
Altronix AL600ULACM Power Supply/Charger w/Multi-Output Access Power Controller
Model AL600ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC non power limited fuse protected Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACMCB is a PTC protected version of this unit. Learn More$357.94 -
Altronix AL600ULACMCB Power Supply/Charger w/Multi-Output Access Power Controller
Model AL600ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Class 2 Rated power limited PTC protected Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACM is a fuse protected version of this unit Learn More$357.94 -
Altronix MAXIMAL33 Access Power Controller
This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. Learn More$699.95 -
Altronix MAXIMAL7 Access Power Controller
The Altronix MAXIMAL7 distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. Learn More -
BEA 10MAGDE1 Delayed Egress Maglock Kit
BEA’s Delayed Egress Kit is a simple to use, affordable, intelligent and code compliant solution. Learn More$691.68 -
Camden Invision CV-32 Access Control Panel w/ Software, Power Supply & Plug-In Transformer
The Camden Invision CV-32 is an online distributed processing access control system for up to 64 doors. Kits include Control panel with software, power supply, and plug-in transformer. Expandable to 128 doors with optional software module. FACTORY ORDER. Please allow up to 1 week to ship Learn More$855.00 -
Camden Invision CV-32A1 Access Control Panel w/ Software, Power Supply, Plug-In Transformer & 2 AWID Compatible Mullion Readers
The Camden Invision CV-32A1 is an online distributed processing access control system for up to 64 doors. Kits include Control panel with software, power supply, plug-in transformer and 2 AWID compatible mullion readers. Expandable to 128 doors with optional software module. FACTORY ORDER. Please allow up to 1 week to ship Learn More$1,020.00 -
Camden Invision CV-32A2 Access Control Panel w/ Software, Power Supply, Plug-In Transformer & 2 AWID Compatible Single Gang Readers
The Camden Invision CV-32A2 is an online distributed processing access control system for up to 64 doors. Kits include Control panel with software, power supply, plug-in transformer and 2 AWID compatible mullion readers. Expandable to 128 doors with optional software module. FACTORY ORDER. Please allow up to 1 week to ship Learn More$1,155.00 -
Camden Invision CV-32H1 Access Control Panel w/ Software, Power Supply, Plug-In Transformer & 2 HID Format Mullion Readers
The Camden Invision CV-32H1 is an online distributed processing access control system for up to 64 doors. Kits include Control panel with software, power supply, plug-in transformer and 2 HID format mullion readers. Expandable to 128 doors with optional software module. FACTORY ORDER. Please allow up to 1 week to ship Learn More$1,050.00 -
Camden Invision CV-32H2 Access Control Panel w/ Software, Power Supply, Plug-In Transformer & 2 HID Format Single Gang Readers
The Camden Invision CV-32H2 is an online distributed processing access control system for up to 64 doors. Kits include Control panel with software, power supply, plug-in transformer and 2 HID format single gang readers. Expandable to 128 doors with optional software module. FACTORY ORDER. Please allow up to 1 week to ship Learn More$1,200.00 -
CompX eLock LOCKVIEW 3.0 Software Kit
An authorized user of LockView can create a database of users and locks on a local computer. Each user in this "local computer's" database is assigned to a slot in each lock to which they have access A lock's internal memory is divided into 250 slots that store users information thereby giving each lock a maximum of 250 users. The local computer with LockView loaded onto it has the ability to connect to locks and update the lock's memory to correspond with its own database. It is able to gather and manipulate a lock's audit trail, or past operation log. Audit trail information contains the lock's name, the name of user attempting to gain access. the credential used, if access was granted or denied, and the date and time of each interaction. Learn More$370.44 -
Detex 10-800 Universal Logic & Power Supply Controller
The Detex 10-800 is a universal logic and power supply controller that allow for total control over all electrified hardware. The controller receives input from a switch, access control or any dry contact device and processes it into the desired output. One controller can manage applications for up to two doors, such as standard egress, delayed egress and interlocks. All connections for local or remote signaling are contained in one box. The 10-800 logic controller provides at least 2A of DC power at the door. A battery backup/charging circuit is standard with each controller to deliver an uninterrupted source of power for up to 4 hours (battery sold separately). Learn More$824.25 -
Detex V40-EE-CD Wide & Narrow Stile Alarmed Delayed Egress Rim Exit Device w/ Cylinder Dogging
The Detex V40xEE, designed for primary and secondary exits, provides a secure 15-second delay and a 100dB alarm when someone attempts to exit. This 15-second delay allows management time to respond before someone exits and the alarm deters the exit from occurring. Per life safety requirements, the V40xEE must be provided with a fire alarm input, thus providing a system override during a fire emergency. The V40xEE provides security while meeting all life safety concerns, offering an exceptional value. Learn More$923.06 -
Detex V40-EM Wide & Narrow Stile Alarmed Delayed Egress Rim Exit Device w/ Magnetic Locking
The V40xEM, designed for primary and secondary exits, provides a secure 15-second delay and a 100dB alarm when someone attempts to exit. This 15-second delay allows management time to respond before someone exits and the alarm deters the exit from occurring. Per life safety requirements, the V40xEM must be provided with a fire alarm input, thus providing a system override during a fire emergency. The V40xEM provides security while meeting all life safety concerns, offering an exceptional value. Learn More$1,059.75 -
Dortronics 43211-L Economical 2-Door Interlock Mantrap Controller (2-Door / 1-Room / 2-Normally Locked Doors)
The 43211-L door interlock controller provides a high level of access control and an economical solution for 2-door systems (2-Door / 1-Room / 2-Normally Locked Doors) Learn More$520.31 -
Dortronics 43211-LU Economical 2-Door Interlock Mantrap Controller (1 Normally locked Door 1 Normally Unlocked Door)
The 43211-LU door interlock controller provides a high level of access control and an economical solution for 2-door systems (1 Normally locked Door 1 Normally Unlocked Door) Learn More$520.31
