(800) 825-7848
M-F 10AM-3PM EST

You have no items in your shopping cart.

Multi-Door Access

Here you will find all of the remote access software necessary to implement, upgrade or install a multi-door system. Included are the necessary disks, drives, cables, and licenses necessary to provide complete implementation. Software will aid you in not only operating, but also installing—including enrollment—as well as maintaining and tracking your product. Our goal is to have an inventory that properly supplies our customers with whatever programs they need for their currently existing, or yet-to-be installed systems. Browse our selection below to find the software you need today.

7 Item(s)

Set Descending Direction
per page

Grid  List 

  1. Altronix ACM4 Access Power Controller

    Altronix ACM4 Access Power Controller

    Altronix ACM4 unit converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs. Learn More
    $70.97

  2. Altronix ACM8 Access Power Controller

    Altronix ACM8 Access Power Controller

    Altronix ACM4 is UL Listed Sub-Assembly multi-output Access Power Controller which converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. Learn More
    $94.63

  3. Altronix AL400ULACM Power Supply/Charger w/Multi-Output Access Power Controller

    Altronix AL400ULACM Power Supply/Charger w/ Multi-Output Access Power Controller

    The Altronix AL400ULACM converts a 115VAC 60Hz input into eight (8) independently controlled power limited fuse protected Fail-Safe and/or Fail-Secure outputs with a total of 12VDC @ 4 amp or 24VDC @ 3 amp of continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs Learn More
    $232.05

  4. Altronix AL600ULACM Power Supply/Charger w/Multi-Output Access Power Controller

    Altronix AL600ULACM Power Supply/Charger w/Multi-Output Access Power Controller

    Model AL600ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC non power limited fuse protected Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACMCB is a PTC protected version of this unit. Learn More
    $291.98

  5. Altronix AL600ULACMCB Power Supply/Charger w/Multi-Output Access Power Controller

    Altronix AL600ULACMCB Power Supply/Charger w/Multi-Output Access Power Controller

    Model AL600ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Class 2 Rated power limited PTC protected Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACM is a fuse protected version of this unit Learn More
    $291.98

  6. Altronix MAXIMAL33 Access Power Controller

    Altronix MAXIMAL33 Access Power Controller

    This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC fuse protected outputs. These power outputs can be converted to dry form ā€œCā€ contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. Learn More
    $699.95

  7. Altronix MAXIMAL7 Access Power Controller

    Altronix MAXIMAL7 Access Power Controller

    The Altronix MAXIMAL7 distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC fuse protected outputs. These power outputs can be converted to dry form ā€œCā€ contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. Learn More
    $618.75

    Out of stock

7 Item(s)

Set Descending Direction
per page

Grid  List 

Access Control Software

Determining the best remote access software for you is not as simple as picking a recognizable name brand, and then hoping that it is compatible with your system, it first determines analyzing your system’s needs, and procuring accordingly.

We offer a broad variety of access software for our customers, because we understand that each client’s needs will inevitably be different.

Computer Compatibility

Most of the products that we offer are primarily compatible with Windows software, which is the most common business-operated OS. Products like Alarm Lock’s AL-PCI2 Trilogy Audit are specially designed for use with a personal computer, minimizing the need for a large computer network, or extra non-standard computer power.

At a base level, you can expect to need at leas 10Mb of available hard drive space, and 64MB of memory on your RAM. 

Some products, like the Kaba E-Plex software, use programs like Excel to store information, while others like Samsung EZON use their own PC-based program.

Hardware Compatibility

Evaluating hardware compatibility is simply contingent upon the brands and models that you use, and how many access points you have. For a large institution such as a university or hospital, there are programs fitted to maintain thousands of doors and users accounts—whereas for small businesses with one to two doors, such a capacity may be wholly unnecessary. 

Additionally, read each product descriptions carefully to make sure that the software was built to correspond with your hardware. We do not recommend simply buying access software in hopes that it works with your access systems. Each system is uniquely designed by its manufacturer, and while there may be crossover between brands, it’s important that you check for compatibility. 

If you need assistance in determining compatibility, we have both a search tool, that can help you find the exact product you’re looking for, and also a dedicated team of customer service representatives who would be more than willing to assist you in determining which is the best remote access software for you. 

We strive to meet each and every one of our customers’ needs, so our commitment to you is to help you find exactly what you’re looking for, and make shipping and implementation very convenient. We offer free shipping on all orders over $200, and provide several bundles that make purchasing the necessary equipment an all-in-one experience.

Thank you for choosing to purchase your access control software today through Buy Access!