Door Controllers
A door controller is a system which enables an authority to control access to areas and resources in a given physical facility or computer-based information system. An access control system, within the field of physical security, is generally seen as the second layer in the security of a physical structure.
-
Yale 782 Power Control
Yale 782 Designed to control one or two electric latch retraction “P” exit devices. Equipped with two 20-second timers which can operate the exit devices together or independently. Requires a momentary or timed, dry contact input and can be interfaced with access control systems, automatic door operators, “blow open” type scenarios and has provisions for N/C fire alarm systems. Learn More$351.56 -
Visonic AXS-100 Kit Pro Indoor Two-Door Proximity Access Control System
The AXS-100 is an electronic access control system for controlling two doors. Eight controllers can be networked together to control a total of 16 doors. The controller relay activates a lock or an electromagnetic strike (EMS), when a valid proximity key card or tag is presented to the reader. The use of a proximity (non-contact) key makes the installation of the AXS-100 system an attractive possibility in harsh environments and in places with poor lighting conditions. The proximity keys are totally sealed and wear resistant. The lock reads the key ID, whenever the key is held close to the reader. Learn More$826.88 -
Secura Key SK-ACP-NE Access Control Board Only
The SK-ACP-NE Advanced Control Board is a highly sophisticated, yet simple to use, two-door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each door has a separate node address. Each door has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input. Each door has two outputs. One output is the relay that activates the door-operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations. As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer. Learn More$715.79 -
Secura Key SK-ACP-LE Access Control Panel Large Enclosure
The SK-ACP Advanced Control Panel is a highly sophisticated, yet simple to use, two-door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each door has a separate node address. Each door has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input. Each door has two outputs. One output is the relay that activates the door-operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations. As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer. Learn More$783.04 -
Secura Key eACCESS-2 Access Control System Kit
Secura Key eACCESS-2 easy to learn and easy to install, without compromising quality or sacrificing critical features these convenient e*ACCESS kit contain everything you need for a complete two-door, expandable system for a very low price. SecuraKey’s feature-filled SK-NET™ software, along with the SK-ACP advanced control panel make this a state-of-the-art package Learn More -
SDC DEC-J Interior Surface Mount Box For 101-DE
SDC DEC-J Interior Surface Mount Box For 101-DE Learn More$58.49 -
SDC 101-KDE Exit Check Delayed Egress Controller w/ Key Switch/Keypad Control & Reset
SDC 101-KDE Exit Check Delayed Egress Controller w/ Key Switch/Keypad Control & Reset. Verbal Instruction, Tone, Digital Countdown Display with digital keypad for system control FACTORY ORDER. Please allow up to 3 weeks to ship Learn More$531.25 -
SDC 101-DE Exit Check Delayed Egress Controller w/ Keypad Control & Reset
SDC 101-DE Exit Check Delayed Egress Controller w/ Keypad Control & Reset. Verbal Instruction, Tone, Digital Countdown Display with digital keypad for system control FACTORY ORDER. Please allow up to 3 weeks to ship Learn More$523.99 -
Schlage SBB-RI Bright Blue Reader Interface
The SBB-RI offers a cost effective, modular approach to access control system design. The SBB-RI is the bridge between the reader controller and the reader, and is supported by the Schlage bright blue Reader Controller (SBB). The SBB-RI is compatible with several read head technologies. Learn More$213.75 -
Schlage SBB-NRI Bright Blue Network Reader Interface
The SBB-NRI is a cost-effective solution that can extend the reach of your bright blue system. This IP-based reader interface is perfect for remote locations where wiring can be a challenge. The SBB-NRI connects to the SBB controller board via your network, allowing you to bring remotely located readers online with your bright blue access control system. The SBB-NRI is compatible with most card readers (any device with a Wiegand output), including the Schlage SXF Series Card Readers. Learn More$455.00 -
Schlage SBB Bright Blue Access Door Controller
Bright Blue is a web-based access control system from Schlage. Its embedded intelligence design means it does not require special software installation or a dedicated PC. Any computer running a standard web browser can be used to access,monitor and manage your system. The system’s user-friendly design means that anyone can use it, making access control a simple part of your busy life. This system is web-based so you can access it like any otherweb page on the internet. bright blue comes network-ready and easily connects to your network using an Ethernet port. After the controller is hooked up, you simply use any network-connected computer to access and manage your system. It’s web-based design makes installation a breeze. Everything about Schlage’s bright blue is easy - from installation and training to system management, support and maintenance, it is user-friendly and reliable. The system provides easy-to-use configuration wizards and help tips so that even novice computer users will be able to set up and navigate their access control system. The configuration wizards allow you to add personnel, set up doors, and assign personnel access to doors based on their time schedules. Enhance your security system with bright blue video integration. When used with bright blue, each card swipe can be linked to video, thereby allowing the user to perform investigations with accuracy Learn More$1,363.20 -
Schlage CT5000 Offline Controller
The CT5000 is an offline single opening controller designed for applications where the security and convenience of offline electronic access control is desired, but an integrated electronic lock may not be practical. It is an ideal solution for narrow stile aluminum store front applications because it can work with a variety of readers as well as interface with peripheral devices such automatic operators, electric strikes, and electromagnetic locks. Learn More$505.00 -
ROSSLARE AC-215 2-Door Networkable Access Control Unit
Full online/offline operation with 10,000 history event log in each ACU. Supports 5000 Users, 20,000 Non-Access User. System management performed on PC server application with client/server operator access. Learn More$479.47 -
Paxton Net2 Nano One Door Access Control Unit (654-943-US)
Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users" access. Each control unit is part of a network but can run independently making its own decisions and remembering events. The Net2 nano control unit connects to the central administration PC using Paxton Access" proprietary and secure wireless technology. Net2 nano control units can be mixed with Net2 classic and Net2 plus control units and can be added to existing Net2 installations. This will be particularly useful where wiring would prove difficult. Control units are sold as a PCB only, within a plastic housing or mounted within a 2A plastic boxed backup power supply. The Net2 nano cannot be mounted in a metal box because of its use of wireless technology. Learn More$279.50 -
Paxton Net2 I/O Board In Plastic Housing (385-710-US)
The Net2 I/O board consists of 4 inputs and 4 outputs. It connects directly to a LAN/WAN via an onboard RJ45 connector. I/O boards can be distributed around a building as required. Inputs and outputs can be controlled using the Net2 software "triggers and actions" feature. The unit is provided with a label clearly showing the connections. The I/O board is fitted with the same "rising clamp" connectors as the Net2 control unit. The I/O board"s inputs and outputs are configured using the Net2 software "triggers and actions" feature. Learn More$338.00 -
Locknetics CT500-PS-EIR Hardwired Universal Controller w/ Power Supply & Emergency Interface Relay
Schlage CT500 universal controllers provide access control solutions for doors secured with electrified locking devices such as electric strikes and electromagnetic locks. These controllers are managed by Schlage Security Management System software, so the same software that programs the CT500 can also manage your door and perimeter access trim locking systems. This allows you to manage multiple opening types in your facility under one system. Universal controllers are stand alone, hardwired access controllers that can operate on 12/24 VAC/VDC. HID proximity, magnetic stripe cards, iButtons and PIN codes with linked access (prox + PIN, mag + PIN, iButton + PIN) can be supported by the controller, offering your facility a variety of credential options depending on your security needs or supporting an existing system. No network wiring is required. Installation is quick and easy. CT500 units provide 500 user and 500 audit trail events with SmarTime™ capability. Universal controllers can be programmed and audited by the offline interface ports on the various reader and keypad models available from Schlage. Readers and keypads are available for both narrow stile and single gang installations in Lexan and architectural finishes with and without keypads. When you desire to manage access for multiple users over a variety of openings, universal hardwired CT500 with Schlage Security Management System software offer you yet another solution from Ingersoll Rand Security Technologies. Learn More$454.10 -
Locknetics CT500-KLC Hardwired Universal Controller w/ Key Lock Cover
Schlage CT500 universal controllers provide access control solutions for doors secured with electrified locking devices such as electric strikes and electromagnetic locks. These controllers are managed by Schlage Security Management System software, so the same software that programs the CT500 can also manage your door and perimeter access trim locking systems. This allows you to manage multiple opening types in your facility under one system. Universal controllers are stand alone, hardwired access controllers that can operate on 12/24 VAC/VDC. HID proximity, magnetic stripe cards, iButtons and PIN codes with linked access (prox + PIN, mag + PIN, iButton + PIN) can be supported by the controller, offering your facility a variety of credential options depending on your security needs or supporting an existing system. No network wiring is required. Installation is quick and easy. CT500 units provide 500 user and 500 audit trail events with SmarTime™ capability. Universal controllers can be programmed and audited by the offline interface ports on the various reader and keypad models available from Schlage. Readers and keypads are available for both narrow stile and single gang installations in Lexan and architectural finishes with and without keypads. When you desire to manage access for multiple users over a variety of openings, universal hardwired CT500 with Schlage Security Management System software offer you yet another solution from Ingersoll Rand Security Technologies. Learn More$345.49 -
Locknetics CT1000-PS-EIR Offline Hardwire Door Controller w/ Power Supply & Emergency Interface Relay
Schlage CT1000 universal controllers provide access control solutions for doors secured with electrified locking devices such as electric strikes and electromagnetic locks. These controllers are managed by Schlage Security Management System software, so the same software that programs the CT1000 can also manage your door and perimeter access trim locking systems. This allows you to manage multiple opening types in your facility under one system. Universal controllers are stand alone, hardwired access controllers that can operate on 12/24 VAC/VDC. HID proximity, magnetic stripe cards, iButtons and PIN codes with linked access (prox + PIN, mag + PIN, iButton + PIN) can be supported by the controller, offering your facility a variety of credential options depending on your security needs or supporting an existing system. No network wiring is required. Installation is quick and easy. CT1000 units provide 1000 user and 1000 audit trail events with SmarTime™ capability. Universal controllers can be programmed and audited by the offline interface ports on the various reader and keypad models available from Schlage. Readers and keypads are available for both narrow stile and single gang installations in Lexan and architectural finishes with and without keypads. When you desire to manage access for multiple users over a variety of openings, universal hardwired CT1000 with Schlage Security Management System software offer you yet another solution from Ingersoll Rand Security Technologies. Learn More$580.09 -
Keyscan CA200 Access 2 Door Control Unit
Keyscan door control units are built for longevity, durability and reliability. Engineered by Keyscan, 2, door control units are designed for fast and efficient performance with standard features like dual on-board processors and heavy duty relays. Keyscan controllers are built for maximum flexibility and limitless expandability. And they're all backed with Keyscan's legendary customer service and technical support. Learn More$1,605.75 -
Keri Systems TDK500 2-Door Distribution Kit
Keri has introduced a distributor 2-door shelf kit that contains the key Keri components required to install a 2-door system, and what is not included (full compliment of cards/tags, locks, switches, buttons, wire, etc.) Learn More$1,464.00 -
Keri Systems SM-2000X Intelliprox Smart Module
The SM-2000 Smart Module provides all functions necessary to manage access to a single door and provide industry standard Wiegand output (with Local door control backup on demand). The SM-2000 fits in a single gang electrical box. Learn More$175.00 -
Keri Systems SB-593 Satellite Expansion Board
The SB-593 Satellite Expansion Board economically provides second door control plus extra general purpose inputs and outputs. Learn More$313.88 -
Keri Systems PXL-500W-NE Tiger II Controller For Wiegand Compatible Readers (No Enclosure)
The Keri Systems PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri's Doors for use with Windows software. Learn More$702.00 -
Keri Systems PXL-500W Tiger II Controller For Wiegand Compatible Readers
The Keri Systems PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri's Doors for use with Windows software. Learn More$715.20 -
Keri Systems PXL-500P-NE Tiger II Controller For MS Readers (No Enclosure)
Keri's PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri's Doors for use with Windows software. Learn More$631.13 -
Keri Systems PXL-500P Tiger II Controller For MS Readers
Keri's PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri's Doors for use with Windows software. Learn More$643.50 -
Keri Systems NXT-4x4 Input/Output Expansion Module
The NXT-4X4 Input/Output Expansion Module provides functionality to any Doors NetXtreme access control system by adding auxiliary I/O that can be used for additional access control functionality, monitoring non-reader doors or other devices, and creating powerful action sequences by linking input triggers to outputs. The module can be connected anywhere along the RS-485 trunk, most commonly at the controller or near a reader. One module can be added per trunk, allowing up to an extra 8 inputs and 8 outputs on an NXT-2D Controller and an extra 16 inputs and outputs on an NXT-4D controller. The module’s relays are re-assignable and interchangeable with the main controller’s relays. The module can be mounted next to the door providing local door control and local door alarm functions while minimizing the cable bundle from door to controller. The unit also has a port to plug in a reader interface module (NXT-RMX) to allow Keri MS reader signals to be sent down the RS-485 line. Learn More$198.75 -
Keri Systems NXT-4D NetXtreme 4 Door TCP/IP Controller
The NXT-4D Xtreme 4 Door Controller is built for today’s IT environments. With all Ethernet functionality built directly into the controller, Keri’s proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration. By using an existing TCP/IP network, controller cabling costs can be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they can be reduced up to 50% over traditional hard-wired access systems. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network’s valuable bandwidth To expand the system’s capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controller’s RS-485 trunks (busses). Customers can choose between Keri’s new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keri’s MS Series Proximity Readers via the NXT-RM Reader Interface Module. To manage the system, Doors NetXtreme software has much of the same look and feel as Keri’s acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture. Learn More$1,407.50 -
Keri Systems NXT-2D NetXtreme 2 Door TCP/IP Controller
The NXT-2D Xtreme 2 Door Controller is built for today’s IT environments. With all Ethernet functionality built directly into the controller, Keri’s proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration. Networking between NXT-2D controllers and/or its sister NXT-4D Xtreme 4 Door Controller also utilize peer to peer Ethernet standards. The NXT-2D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network’s valuable bandwidth. To expand the system’s capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controller’s RS-485 trunks (busses). Customers can choose between Keri’s new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keri’s MS Series Proximity Readers via the NXT-RM Reader Interface Module. To manage the system, Doors NetXtreme software has much of the same look and feel as Keri’s acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture. Learn More$961.25 -
Keri Systems EGH-12 Heater Kit For Entraguard Units
Keri Systems EGH-12 Heater Kit For Entraguard Units Learn More$120.89
