Security door controls come in a variety of products, but they essentially establish a system by which a group of people can enter a given door. Whether that given facility has chosen to utilize an access control system beyond the basic electronic or deadbolt lock, these security door controls add a further layer of security that can protect fraudulent or forced entry. As a second layer of security, we understand that is important to have high functioning, quality materials, and our inventory reflect that need for our customers. Please browse our inventory and see which product best meets your needs.
The Schlage Smart Reader Controller (SSRC) is an intelligent device with a modular approach. The SSRC is an independently programmable device that effectively combines the capabilities of a controller and reader interface into a single board. It communicates with the Security Management System software via TCP/IP protocol and can be connected to a variety of different read head technologies and electronic locking devices. The communication architecture is capable of being fully networked thereby saving the customer wiring and expensive installation labor costs. Includes enclosure with a tamper switch, lock and key. Learn More$612.00
The Schlage REPTR400 Wireless Repeater Kit is a simple, all-in-one package solution for access control applications that require an extended wireless range. The Schlage REPTR400 includes an AD Series Panel Interface Module (PIM400-TD2) and an AD Series Wireless Reader Interface (WRI400). The PIM400-TD2 interfaces with most access control systems. The WRI400 gathers signals from around the door components and wirelessly transmits them back to the PIM400-TD2. The REPTR400 extends the wireless range by receiving information on one radio frequency (RF) channel and retransmits it on another RF channel. Each REPTR400 can extend the wireless range of your access control system by up to 200 feet indoors or up to 1000 feet, line of site. The use of multiple REPTR400’s in series allows an indefinite expansion of the RF signal between the access control panel and the Schlage AD Series Wireless Reader Interface of Schlage AD-400 electronic locks. Use of the REPTR400 allows you to extend the reach of your access control system to remote locations without running wires, thus saving you time and money on installation. For example, the REPTR400 can be used for gate applications. The PIM400 is located inside of a building, up to 500 feet from the access control panel. A remote antenna (sold separately) can be wired into the PIM400 and installed on the exterior of the building. The REPTR400 can be installed at the gate, up to 1000 feet away, with a clear line of site, connecting the card reader and locking hardware to the WRI400. This solution eliminates the need for considerable trenching and the installation of an access control panel at the gate location, while giving the access control system real-time information at the remote gate. Learn More$920.63
The Gate Control Kit (GCK400) complement and expand the AD Series platform by bringing wireless access control to applications that are difficult to reach with a traditional wired approach. The GCK400 kit comprised of the Wireless Reader Interface (WRI400), the Panel Interface Module (PIM400-TD2), a Remote Antenna (ANT-REM I/O) and a power supply 593PI-12DC). The GCK400 kit also includes an antenna grounding kit (MGB+MCA5). The Wireless Reader Interface (WRI400) is compatible with most popular Wiegand or Clock & Data format credential readers on the market today. The WRI400 communicates via 900MHz to the PIM400-TD2 within a range of up to 1000 feet with a clear line of site. The PIM400 TD2 is hardwired to the access control panel where decisions are validated and recorded. The GCK400 kit eliminates the need for trenching in gate applications, driving a significant reduction of installation time and cost. The gate kit is ideal for parking lots, airports, military bases and garages. Roadways, parking lots and landscape are left intact since the need to run wires underground is eliminated. Learn More$1,468.75
Out of stock
The Elevator Control Kit (ECK400) complement and expand the AD Series platform by bringing wireless access control to applications that are difficult to reach with a traditional wired approach. The ECK400 kit comprised of the Wireless Reader Interface (WRI400), the Panel Interface Module (PIM400-TD2), a Remote Antenna (ANT-REM I/O) and a power supply 593PI-12DC). The Wireless Reader Interface (WRI400) is compatible with most popular Wiegand or Clock & Data format credential readers on the market today. The WRI400 communicates via 900MHz to the PIM400-TD2 within a range of up to 1000 feet with a clear line of site. The PIM400 TD2 is hardwired to the access control panel where decisions are validated and recorded. The GCK400 kit eliminates the need for trenching in gate applications, driving a significant reduction of installation time and cost. The ECK400 eliminates the need for traveling cables to elevator applications simplifying installation. Access control can be applied to elevators at a much faster rate, reducing downtime and disruption within the facility. FACTORY ORDER. Please allow up to 4 weeks to ship Learn More$1,406.25
Out of stock
The Schlage CT5000 controller is a specialized offline controller, made for applications desiring the security and ease of use of an electronic access control, but where a fully integrated electronic lock isn't practical. It is the perfect solution for narrow style store front applications because it can interface with many readers and auxiliary devices like electromagnetic locks, automatic operators, and electric strikes. This unit has the capability to support up to two Wiegand reader inputs separately, as well as the inclusion of three C relay outports for auxiliary, alarm, and electric strikes. Card functions supported on the CT5000 include normal, freeze, toggle, construction, pass through, lockdown, and Card + PIN applications. Credential technology compatibility on the CT 5000 controller include Magnetic Stripe racks 1,2, and 3, 13.56 MHz Smart cards, and 125 kHz Proximity. This offline controller can also support up to 5,000 unique users and 5,000 audits. Access control software on the Schlage CT5000 controller supports Schlage SMS Express, Premier, and Enterprise control software, and is compatible with CO-Series and AD-Series networked readers. The CT5000 can also become a wireless reader interface (WRI400), communicating to an AD-Series PIM400 via 900MHz wireless signals. Included with this unit is a 15-foot USB remote cable connector and decorative wall plate. Learn More$454.50
Door Access Control
An access power controller, similar to the Altronix ACM and AL series that we offer, converts AC/DC inputs into independent fuse controlled outputs. This essentially means that the given system is routing power to different door control hardware, that can include things like maglocks, keypads, and electric strikes.
These accessories are especially important for multi-door systems, because they help increase the given bandwidth of a facility for independent, unified control over a multi door system. This feature also allows for alarm monitoring.
The AL power controller has the extended feature of turning those inputs into Fail-Safe/Fail-Secure outputs, which allows for further peace of mind when dealing with building security so highly related to the power source. The ability to disconnect individual outputs from the fire alarm also adds the safety of emergency exiting procedures in the event of a problem.
Code keypads and control panels also allow for you to give broader security for those who are entering various secure rooms. These keypads have the optional add on of a prox card reader, in the even that you may want to grant limited access to certain individuals, or protect your key code in various environments.
Our keypad products, like the Alarm Lock NETPDKPAK, is compatible with most HID prox cards and keyfobs, and allow for varying customization and security privileges, such as multilevel access control.
Power Supplies & Transformers
Our control panel power supplies and power transformers, such as the Camden Invision CV-32H1, creates an online distributed processing access control system, that can be set up over an internet based network, giving you unified control over multiple buildings with minimal infrastructure overhaul.
In some cases, this can be upwards of 128 doors, which is useful in applications like hospitals and universities. Additionally, these systems and power supplies allow for features like battery-backup and remote dialup. The software featured with such products allows for further customization and expanded options like photo import and customizable IDs.
Whether you know exactly what parts you need for your system or are considering expanding your current infrastructure, then we encourage you to make use of search features, in which you can find exactly the product you’re looking for among our vast inventory.
And if you cannot locate something, please call our customer service associates, and we’ll gladly help you get the part you need. And as always, free shipping on orders over $200. Thanks for choosing Buy Access!