Communication Interface
-
Secura Key CBLSA Cable Kit For Laptop
Secura Key CBLSA Cable Kit For Laptop with 3 Connectors Learn More$87.36 -
Schlage SENROLL Enrollment Reader
The SENROLL Enrollment Reader can be used in conjunction with the Schlage Security Management System (SMS) Select, Premier or Enterprise Software to facilitate automatic enrollment of online and/or offline credentials into your access control system. Automatic enrollment eliminates the time involved in manually entering credential data and greatly reduces the potential for human error. FACTORY ORDER. Please allow up to 4 weeks to ship Learn More$999.00 -
Schlage PIM400-TD2 Panel Interface Module
The Schlage PIM400-TD2 seamlessly integrates to virtually any access control panel and their reader interface modules via Wiegand or Clock & Data protocols. Each PIM400-TD2 supports up to two wireless access devices such as AD-400 series locks. Learn More$415.63 -
Schlage PIM400-485 Panel Interface Module For RS485 Communication
The PIM400-485 seamlessly integrates to select access control panels via RS485, eliminating the need for reader interface modules. Each PIM400-485 supports up to 16 wireless access devices such as AD-400 locks. Learn More$781.25 -
Schlage PIM-EXP Panel Interface Module Expander Board
Schlage PIM-EXP Panel Interface Module Expander Board Learn More$312.06 -
Schlage PIB300-2D Panel Interface Board
Hardwired Panel Interface Board (PIB300-2D) Learn More$235.13 -
Schlage MGB+MCA5 Grounding Kit
Schlage MGB+MCA5 Grounding Kit Learn More$87.75 -
Schlage HHD KIT Utility Software On Handheld Device
The Schlage Utility Software (SUS) on the Handheld Device (HHD) provides an easy way to manage people, audits and locks for simple access control management. The HHD connects with Schlage AD-Series electronic locks and accessories via a USB interface and utilizes Active Synch or Win Mobile Device Manager to communicate with your PC via the USB port. The HHD is also able to connect to the SPED, KC2, CM, CL, CT500, CT1000, CL Controller and WA-Series PIMs via a serial cable connection Learn More$552.19 -
Schlage HH-USB Cable Used To Connect HHD To AD-Series Products
Schlage HH-USB Cable Used To Connect HHD To AD-Series Products Learn More$34.02 -
Schlage HH-Serial Cable Used To Connect HHD To CIP
Schlage HH-Serial Cable Used To Connect HHD To CIP Learn More$63.69 -
Schlage CRM2 Magnetic Stripe Credential Enrollment Reader
The CRM2 Magnetic Stripe Credential Enrollment Reader are designed to allow easy enrollment of credentials into the SMS Express access control system. These compact readers eliminate the need for manual data entry, and provide error-free identification and security throughout the workplace. The plug and play functionality provided via a convenient USB connection allows either of these readers to seamlessly integrate with the SMS Express software. Additionally, the reader allows for keystrokes to be added before and after the card’s data, providing flexibility and data customization. Note: Compatible with SMS Express version 4.0 and higher Learn More -
Schlage COM400P Communication Module Kit
The Schlage COM400P Communication Module Kit is used to convert a lock to AD400 function Learn More$172.19 -
Schlage COM400L Communication Module Kit
The Schlage COM400L Communication Module Kit is used to convert a lock to AD400 function Learn More$172.19 -
Schlage COM300P Communication Module Kit
The Schlage COM300P Communication Module Kit is used to convert a lock to AD300 function Learn More$104.96 -
Schlage COM300L Communication Module Kit
The Schlage COM300L Communication Module Kit is used to convert a lock to AD300 function Learn More$104.96 -
Schlage COM200P Communication Module Kit
The Schlage COM200P Communication Module Kit is used to convert a lock to AD200/250 function Learn More$39.90 -
Schlage COM200L Communication Module Kit
The Schlage COM200L Communication Module Kit is used to convert a lock to AD200/250 function Learn More$39.90 -
Schlage COM200C Communication Module Kit
The Schlage COM200C Communication Module Kit is used to convert a lock to AD200/250 function. Learn More$33.25 -
Schlage ANT400-REM-I/O+6dB AD-Series Remote Antenna For Wireless System
The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. When increased wireless communication range is required, the ANT400-REM-I/O+6dB model can up to double the range in the line of sight that it is aimed. This “gain antenna” increases the signal strength by focusing the energy Learn More$249.38 -
Schlage ANT400-REM-HALL AD-Series Remote Antenna For Wireless System
The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. Learn More$253.10 -
Schlage ANT400-REM-CEILING AD-Series Remote Antenna For Wireless System
The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. Learn More$190.00 -
Paxton Net2Air USB Dongle (380-592-US)
The Paxton Net2Air USB dongle enables PC software to exchange data with Paxton Access products that communicate using Net2Air wireless technology. It is a short range Net2Air bridge device. Learn More$101.39 -
Paxton Net2Air USB bridge (477-268-US)
The Net2 nano range of access control units uses Paxton Access" Net2Air wireless technology to communicate with the Net2 software. The Net2Air USB bridge provides the wireless communication link between the PC running Net2 software and Net2 nano control units. We recommend the use of the Net2Air site surveyor kit for checking signal strength around a site prior to installation. Learn More$136.50 -
Marks i-Dat EA6200 MARK2 USB Unit With Memory Stick
i-Que audit trails can be downloaded and programming changes can be made with the i-Dat infra-red read/write device. This is a hand-held unit that communicates with enabled i-Que models and has a 4-line display showing the lock ID and serial number, current time, day and date, battery status and number of events downloaded. Learn More -
Marks 173 BIO USB Cable
USB Cable for Biometric Lock Learn More -
Locknetics CRM Credential Reader Magstripe
Locknetics CRM Credential Reader Magstripe Learn More$523.15 -
Lantronix USD1100 One-Port Device Server Ethernet Converter
Device networking is what powers M2M (machine to machine) communication. The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes! This single-port external device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network. Learn More$178.13 -
Keri Systems NC-485X Network Converter
Keri Systems NC-485 Network Converter by using Keri's LAN-520 LAN Port in combination with an NC-485 Network Converter, PXL-500 Tiger II Controllers, which are normally connected via a two-wire RS-485 network, can be connected via Ethernet to bridge long distances within a facility or campus, as well as across any distance where a LAN/WAN exists. This allows customers to combine what would normally be separate sites, each with their own RS-485 network, into a single site for better security management, whether across a corporate campus or across town. Typically, access controllers within a building or group of buildings would be connected using an RS-485 network. If cabling to another building is cost-prohibitive or impossible, but an Ethernet backbone exists between them, the connection can be made by using the LAN-520 LAN Port and NC-485 Network Converter on network segment, which converts the RS-485 network data to an Ethernet packet, then back to RS-485 where the network can be continued. If the customer choses not to run any RS-485 networking, all controllers can be connected via TCP/IP to take advantage of the existing Ethernet LAN/WAN. Learn More$66.30 -
Keri Systems LAN-520 Interface
Keri System LAN-520 - Lan Port (RS-232 To Ethernet) Can be used with NC-485 network converter to enhance network capability Learn More$237.38 -
Keri Systems KDP-552 Communication Cable
Keri Systems Cable to PC or Modem Learn More$51.79
