(800) 825-7848
M-F 9AM-5PM EST

You have no items in your shopping cart.

Communication Interface

Communication interfaces are an important part of access systems, of every kind. This category is dedicated to the machine-to-machine communication devices that allow your door control systems to function properly. This can include interface communications from a control panel to a computer, external power supply, modem, or Ethernet gateway—connecting your systems over the Internet. Giving your systems this kind of communication is not only standard, but it is the best way to increase your systems security when breached. Please browse our selection and find the parts that are right for you.

Items 1 to 30 of 51 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  1. Secura Key CBLSA Cable Kit For Laptop

    Secura Key CBLSA Cable Kit For Laptop

    Secura Key CBLSA Cable Kit For Laptop with 3 Connectors Learn More
    $87.36

    Out of stock

  2. Schlage SENROLL Enrollment Reader

    Schlage SENROLL Enrollment Reader

    The SENROLL Enrollment Reader can be used in conjunction with the Schlage Security Management System (SMS) Select, Premier or Enterprise Software to facilitate automatic enrollment of online and/or offline credentials into your access control system. Automatic enrollment eliminates the time involved in manually entering credential data and greatly reduces the potential for human error. FACTORY ORDER. Please allow up to 4 weeks to ship Learn More
    $999.00

  3. Schlage PIM400-TD2 Panel Interface Module

    Schlage PIM400-TD2 Panel Interface Module

    The Schlage PIM400-TD2 seamlessly integrates to virtually any access control panel and their reader interface modules via Wiegand or Clock & Data protocols. Each PIM400-TD2 supports up to two wireless access devices such as AD-400 series locks. Learn More
    $372.35

  4. Schlage PIM400-485-SBB Panel Interface Module For RS485 Communication

    Schlage PIM400-485-SBB Panel Interface Module For RS485 Communication

    The PIM400-485 seamlessly integrates to select access control panels via RS485, eliminating the need for reader interface modules. Each PIM400-485 supports up to 16 wireless access devices such as AD-400 locks. Learn More
    $843.75

  5. Von Duprin PS873-2 Power Supply

    Schlage PIM-EXP Panel Interface Module Expander Board

    Schlage PIM-EXP Panel Interface Module Expander Board Learn More
    $308.55

  6. Schlage PIB300-2D Panel Interface Board

    Schlage PIB300-2D Panel Interface Board

    Hardwired Panel Interface Board (PIB300-2D) Learn More
    $210.65

  7. Schlage King Cobra KC5590-2-17-LC-626 Snap Electronic Mortise Lock

    Schlage P512112 Computer Interface Module Without i-Button Reader

    Schlage P512112 Computer Interface Module Without i-Button Reader Learn More
    $190.50

  8. Schlage P101203 Computer Interface Module w/ iButton Reader

    Schlage P101203 Computer Interface Module w/ iButton Reader

    Schlage P101203 Computer Interface Module w/ iButton Reader Learn More
    $202.50

  9. /

    Schlage MGB+MCA5 Grounding Kit

    Schlage MGB+MCA5 Grounding Kit Learn More
    $87.75

  10. Schlage HHD-KIT Utility Software On Handheld Device

    Schlage HHD-KIT Utility Software On Handheld Device

    The Schlage Utility Software (SUS) on the Handheld Device (HHD) provides an easy way to manage people, audits and locks for simple access control management. The HHD connects with Schlage AD-Series electronic locks and accessories via a USB interface and utilizes Active Synch or Win Mobile Device Manager to communicate with your PC via the USB port. The HHD is also able to connect to the SPED, KC2, CM, CL, CT500, CT1000, CL Controller and WA-Series PIMs via a serial cable connection Learn More
    $523.13

  11. Schlage HH-Serial Cable used to connect HHD to CIP

    Schlage HH-USB Cable Used To Connect HHD To AD-Series Products

    Schlage HH-USB Cable Used To Connect HHD To AD-Series Products Learn More
    $31.50

  12. Schlage HH-Serial Cable used to connect HHD to CIP

    Schlage HH-SERIAL Cable Used To Connect HHD To CIP

    Schlage HH-SERIAL Cable Used To Connect HHD To CIP Learn More
    $68.60

  13. Schlage CRM2 Magnetic Stripe Credential Enrollment Reader

    Schlage CRM2 Magnetic Stripe Credential Enrollment Reader

    The CRM2 Magnetic Stripe Credential Enrollment Reader are designed to allow easy enrollment of credentials into the SMS Express access control system. These compact readers eliminate the need for manual data entry, and provide error-free identification and security throughout the workplace. The plug and play functionality provided via a convenient USB connection allows either of these readers to seamlessly integrate with the SMS Express software. Additionally, the reader allows for keystrokes to be added before and after the card’s data, providing flexibility and data customization. Note: Compatible with SMS Express version 4.0 and higher Learn More
    $467.10

  14. Schlage COM400P-CG Wireless AD-400 Communication Kit

    Schlage COM400P-CG Wireless AD-400 Communication Kit

    The Schlage COM400P Wireless Communication Module Kit is used to convert a lock to AD400 function Learn More
    $159.50

  15. Schlage COM400L-CG Wireless AD-400 Communication Kit

    Schlage COM400L-CG Wireless AD-400 Communication Kit

    The Schlage COM400L Wireless Communication Module Kit is used to convert a lock to AD400 function Learn More
    $159.50

  16. Schlage COM300P-626 Hardwired AD-300 Communication Kit

    Schlage COM300P-626 Hardwired AD-300 Communication Kit

    The Schlage COM300P Communication Module Kit is used to convert a lock to AD300 function Learn More
    $108.68

  17. Schlage COM300L-626 Hardwired AD-300 Communication Kit

    Schlage COM300L-626 Hardwired AD-300 Communication Kit

    The Schlage COM300L Communication Module Kit is used to convert a lock to AD300 function Learn More
    $108.68

  18. Schlage COM200P-626 Offline AD200/250 Communicate Kit Privacy/Apartment Function On CY/MS Chassis

    Schlage COM200P-626 Offline AD200/250 Communicate Kit Privacy/Apartment Function On CY/MS Chassis

    Schlage COM200P-626 Offline AD200/250 Communicate Kit Privacy/Apartment Function On CY/MS Chassis Learn More
    $70.20

  19. Schlage COM200L-626 Offline AD200/250 Communicate Kit Privacy/Apartment Function On MD Chassis

    Schlage COM200L-626 Offline AD200/250 Communicate Kit Privacy/Apartment Function On MD Chassis

    Schlage COM200L Offline AD200/250 Communicate Kit Privacy/Apartment Function On MD Chassis Learn More
    $70.20

  20. Schlage COM200C-626 Offline AD200/250 Communicate Kit Classroom/Storeroom Function

    Schlage COM200C-626 Offline AD200/250 Communicate Kit Classroom/Storeroom Function

    The Schlage COM200C Communication Module Kit is used to convert a lock to AD200/250 function. Learn More
    $66.00

  21. Schlage ANT400-REM-I/O+6dB AD-Series Remote Antenna For Wireless System

    Schlage ANT400-REM-I/O+6dB AD-Series Remote Antenna For Wireless System

    The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. When increased wireless communication range is required, the ANT400-REM-I/O+6dB model can up to double the range in the line of sight that it is aimed. This “gain antenna” increases the signal strength by focusing the energy Learn More
    $239.25

    Out of stock

  22. /

    Schlage ANT400-REM-HALL AD-Series Remote Antenna For Wireless System

    The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. Learn More
    $253.10

  23. Schlage ANT400-REM-CEILING AD-Series Remote Antenna For Wireless System

    Schlage ANT400-REM-CEILING AD-Series Remote Antenna For Wireless System

    The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. Learn More
    $176.00

    Out of stock

  24. Paxton 477-268-US Net2Air USB bridge

    Paxton 477-268-US Net2Air USB bridge

    The Net2 nano range of access control units uses Paxton Access" Net2Air wireless technology to communicate with the Net2 software. The Net2Air USB bridge provides the wireless communication link between the PC running Net2 software and Net2 nano control units. We recommend the use of the Net2Air site surveyor kit for checking signal strength around a site prior to installation. Learn More
    $136.50

  25. Paxton 380-592-US Net2Air USB Dongle

    Paxton 380-592-US Net2Air USB Dongle

    The Paxton Net2Air USB dongle enables PC software to exchange data with Paxton Access products that communicate using Net2Air wireless technology. It is a short range Net2Air bridge device. Learn More
    $101.39

  26. Marks i-Dat EA6200 MARK2 USB Unit w/ Memory Stick

    Marks i-Dat EA6200 MARK2 USB Unit w/ Memory Stick

    i-Que audit trails can be downloaded and programming changes can be made with the i-Dat infra-red read/write device. This is a hand-held unit that communicates with enabled i-Que models and has a 4-line display showing the lock ID and serial number, current time, day and date, battery status and number of events downloaded. Learn More
    $372.38

  27. Marks 173-BIO USB Cable

    Marks 173-BIO USB Cable

    Marks 173-BIO USB Cable for Biometric Lock Learn More
    $19.25

    Out of stock

  28. Lantronix USD1100 One-Port Device Server Ethernet Converter

    Lantronix USD1100 One-Port Device Server Ethernet Converter

    Device networking is what powers M2M (machine to machine) communication. The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes! This single-port external device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network. Learn More
    $178.13

  29. Keri Systems NC-485X Network Converter

    Keri Systems NC-485X Network Converter

    Keri Systems NC-485 Network Converter by using Keri's LAN-520 LAN Port in combination with an NC-485 Network Converter, PXL-500 Tiger II Controllers, which are normally connected via a two-wire RS-485 network, can be connected via Ethernet to bridge long distances within a facility or campus, as well as across any distance where a LAN/WAN exists. This allows customers to combine what would normally be separate sites, each with their own RS-485 network, into a single site for better security management, whether across a corporate campus or across town. Typically, access controllers within a building or group of buildings would be connected using an RS-485 network. If cabling to another building is cost-prohibitive or impossible, but an Ethernet backbone exists between them, the connection can be made by using the LAN-520 LAN Port and NC-485 Network Converter on network segment, which converts the RS-485 network data to an Ethernet packet, then back to RS-485 where the network can be continued. If the customer choses not to run any RS-485 networking, all controllers can be connected via TCP/IP to take advantage of the existing Ethernet LAN/WAN. Learn More
    $66.30

  30. Keri System LAN-520 Interface

    Keri Systems LAN-520 Interface

    Keri System LAN-520 - Lan Port (RS-232 To Ethernet) Can be used with NC-485 network converter to enhance network capability Learn More
    $237.38

Items 1 to 30 of 51 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2

What is M2M?

The concept of m2m, or machine to machine communication, is simply how your access system communicates. It concerns technologies that can provide both wired and wireless communication routes from one device to the other. It can transmit personal data such as employee ID for prox card readers, as well as keycards and other keyless entry and electronic lock information. This can allow you to have an outside, editable database of information that gives you advanced control over your entryway access. 

In wired technology, machine to machine interface communications promotes technology like Ethernet cables, which can ultimately benefit a wireless Wi-Fi connection. Additionally, wireless m2m can be beneficial insofar as companies that don’t already have a built in wired structure can easily adapt to the new implementation.

Gateway Interface Module

A gateway interface module is optimal for multi-door functions, as it provides a central unit for which to control all of your entryways at once, rather than programming each on individually. 

Our Trilogy Networx communicate through Ethernet or Wi-Fi, and give you the advanced accessibility of programming and storage—providing all of the standard functionality that comes with a standalone unit.

USB Interface

USB interface communication modules, such as Alarm Lock’s AL-PCI2U, allow you to connect with your PC, and transfer data across multiple platforms. This can provide you with multi-function use in your keypad locks as well as control from a notebook or desktop PC. They provide a large amount of memory to match your systems needs, and help to give you unified access control.

Hand Held Programmer

A hand held programmer can be useful because then you have the added freedom of mobility. Unlike a standard television remote, the hand held programmers, like the Keri Systems HPP-22, uses radio frequencies, so that you do not need a direct line of sight. Which means that you can have control where you need it, maintaining the essential purpose of the remote access software.

For all of our communication interface products, we encourage our customers with specific needs to take advantage of our search tools. Just enter the specific product that you need, and you should find a vast inventory waiting for you of exactly what replacement or new part you want. If it’s not available, please contact one of our service representatives and we will get it to you as fast as possible. Thanks for choosing Buy Access!