(800) 825-7848
M-F 9AM-5PM EST

You have no items in your shopping cart.

Communication Interface

Communication interfaces are an important part of access systems, of every kind. This category is dedicated to the machine-to-machine communication devices that allow your door control systems to function properly. This can include interface communications from a control panel to a computer, external power supply, modem, or Ethernet gateway—connecting your systems over the Internet. Giving your systems this kind of communication is not only standard, but it is the best way to increase your systems security when breached. Please browse our selection and find the parts that are right for you.

Items 1 to 30 of 52 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  1. Alarm Lock AL-DTMIII Audit Trail Accessory Transfer Module

    Alarm Lock AL-DTMIII Audit Trail Accessory Transfer Module

    Alarm Lock AL-DTMIII Audit Trail Accessory Transfer Module for Trilogy Locks. Learn More
    $252.00

  2. Alarm Lock AL-IM80211 Trilogy Networx Hardwire/Wireless Gateway Interface Module

    Alarm Lock AL-IM80211 Trilogy Networx Hardwire/Wireless Gateway Interface Module

    Trilogy Networx Locks communicate wirelessly via Ethernet or 802.11B/G for a comprehensive wireless networked door access control system, eliminating door-to-door programming and audit trail retrieval and providing all standalone Trilogy lock functionality plus new network-wide global emergency lockdown/unlock commands Learn More
    $465.75

  3. Alarm Lock AL-IME Trilogy Networx Hardwire Gateway Interface Module

    Alarm Lock AL-IME Trilogy Networx Hardwire Gateway Interface Module

    Up to 50 wall or ceiling-mountable, compact gateway modules can be used per account and are available in hardwired version Learn More
    $318.75

  4. Alarm Lock Trilogy Networx AL-IMEPOE Hardwire Gateway Interface Module + POE

    Alarm Lock AL-IMEPOE Trilogy Networx Hardwire Gateway Interface Module + POE

    Alarm Lock AL-IMEPOE Hardwire Gateway Interface Module + POE Learn More
    $457.50

  5. Alarm Lock AL-IR1 Audit Trail Infrared Printer

    Alarm Lock AL-IR1 Audit Trail Infrared Printer

    Alarm Lock AL-IR1 Audit Trail Infrared Printer for Trilogy Locks. Learn More
    $292.50

  6. Alarm Lock Trilogy AL-PCI2 Audit Trail RS-232 Interface Cable

    Alarm Lock AL-PCI2 Trilogy Audit Trail RS-232 Interface Cable

    Alarm Lock AL-PCI2 Trilogy Audit Trail RS-232 Interface Cable interconnects lock and PC for data transfer. Learn More
    $75.47

  7. •Alarm Lock Trilogy AL-PCI2U Audit Trail USB Interface Cable

    Alarm Lock AL-PCI2U Audit Trail USB Interface Cable

    Alarm Lock Trilogy Audit Trail USB Interface cable interconnects lock and PC for data transfer. Learn More
    $136.56

  8. Codelocks P5000AT-KIT Upgrade Audit Trail Kit For CL5210

    Codelocks P5000AT-KIT Upgrade Audit Trail Kit For CL5210

    Upgrade your CL5010 electronic tubular mortice latch with Audit Trail Function. The Kit Easy Upgrade for existing CL5010 Locks. Includes a USB stick with Codelocks Data Management Software, USB connector, PCB and data transfer cable. Track and Control saving valuable time Manage and Program locks via Codelocks Data Management Software. Download and Review door activity data using USB stick and analyse lock data on your computer Learn More
    $97.50

  9. IEI 232-485 RS-232 to RS-485 Interface (0-295093)

    IEI 232-485 RS-232 to RS-485 Interface (0-295093)

    iEi Convertor RS-232 TO RS-485 Interface Serial Adapter Learn More
    $69.94

  10. IEI DTD Hand-held Data Transfer Device (0-297011)

    IEI DTD Hand-held Data Transfer Device (0-297011)

    Hand-held DATA TRANSFER DEVICE (model DTD) for wireless infrared (IR) transfer of data and retrieval of stored events from the software managed prox.pad plus IR, LS2 and LS2P Series wireless access control locksets. Data is saved to an internal memory for transfer to a PC via USB connection. Learn More
    $265.55

  11. IEI M3M Max 3 Modem Module for Dial Up Remote Site Management Applications (0-230556)

    IEI M3M Max 3 Modem Module for Dial Up Remote Site Management Applications (0-230556)

    The M3M Max 3 Modem provides dial-up remote site management to the Max 3 and MiniMax 3 access control systems. The Max 3 modem is designed for easy plug-on “stackable” mounting to the first Max 3 module in a system. Power and communications are established with the included wire harnesses that connects easily between the Max 3 Modem and the Max 3 module. Learn More
    $299.40

  12. IEI SEG-1 Secured Ethernet Gateway (0-296005)

    IEI SEG-1 Secured Ethernet Gateway (0-296005)

    Secure Ethernet Gateway SEG-1 for IEI Access Systems Learn More
    $376.36

  13. IEI SEG-M Secured Ethernet Gateway Plug-In Module (0-296006)

    IEI SEG-M Secured Ethernet Gateway Plug-In Module (0-296006)

    iEi Electronics SEG-M Secure Ethernet Gateway SEG-M for IEI Access Systems Learn More
    $315.45

  14. IEI USB-Serial USB To Serial Converter (0-295097)

    IEI USB-Serial USB To Serial Converter (0-295097)

    USB to serial convertor on a single gang electrical plate. Color white. Converts either or both RS-232 or RS-485 for use with Max3, MiniMax3, Hub Max II, Hub MiniMax II and prox.pad plus. Intended for use with the Max 3 and prox.pad plus products, the USB-Serial adapter is now offered in a unique single-gang wall plate design. This new design makes communication to our software managed products simple and clean. All wiring is contained within the wall and a single wire from the back of the PC is connected to the attractive single-gang plate. Learn More
    $99.18

  15. HID 310 Mullion Mounted Wiegand Classic Swipe Card Reader

    Kaba E-Plex 54561-000-41 USB Prox Reader/Enroller

    Kaba E-Plex 54561-000-41 USB Prox Reader/Enroller Learn More
    $360.00

  16. Kaba E-Plex EP-MU-COM-001 Eplex Enterprise M-Unit Kit

    Kaba E-Plex EP-MU-COM-001 Eplex Enterprise M-Unit Kit

    Kaba E-Plex EP-MU-COM-001 Eplex Enterprise M-Unit Kit Learn More
    $122.84

  17. Kaba Simplex 064-508674 Programming Module For 850L/850/950 Series Locks

    Kaba Simplex 064-508674 Programming Module For 850L/850/950 Series Locks

    Kaba Simplex 064-508674 Programming Module For 850L/850/950 Series Locks Learn More
    $375.00

  18. Kaba Simplex 502878 Programming Module For Exit Device Operator

    Kaba Simplex 502878 Programming Module For Exit Device Operator

    Kaba Simplex 502878 Programming Module For Exit Device Operator Learn More
    $375.00

  19. Kantech KT-IP Link Network Interface

    Kantech KT-IP Link Network Interface

    Kantech™ IP Link makes it easy and affordable to manage your Kantech access control system over a network. Learn More
    $425.63

  20. Kantech P700WLS ioProx 4-Channel Receiver XSF/ 26-Bit Wiegand

    Kantech P700WLS ioProx 4-Channel Receiver XSF/ 26-Bit Wiegand

    The ioProx receiver can be programmed for either Wiegand format, which is compatible with most door controllers on the market, or for Kantech eXtended Secure Format (XSF) which, when used with one of Kantech’s door controllers, provides enhanced security with an additional measure of protection against ID access code duplication. The ioProx receiver is capable of reading from a distance of up to 24.38 m (80 ft) with a power dipole antenna or 12.19 m (40 ft) with a standard antenna. This longer read range is ideal for applications in remote locations where the limited read range of traditional access control is insufficient. Learn More
    $203.13

    Out of stock

  21. Keri Systems HPP–22 Hand Held Programmer

    Keri Systems HPP–22 Hand Held Programmer

    Programming an IntelliProx unit is accomplished using the HPP-22 Hand-Held Remote Programmer. The HPP-22 has the appearance of a TV remote control, but has a different principle of operation. It is a mini-transmitter using a radio frequency (RF) rather than an infrared signal to transmit data. Unlike a television remote control (that requires a direct line-of-sight between the infrared transmitter in the remote and the infrared receiver in the television) the HPP-22 should be held parallel to the proximity antenna. Hold the HPP-22 within the range of the proximity antenna (approximately 1-foot) and press the appropriate button to send a command. Allow about 0.5 seconds for a response from the reader Learn More
    $140.40

  22. Keri Systems KDP-552 Communication Cable

    Keri Systems KDP-552 Communication Cable

    Keri Systems Cable to PC or Modem Learn More
    $51.79

  23. Keri System LAN-520 Interface

    Keri Systems LAN-520 Interface

    Keri System LAN-520 - Lan Port (RS-232 To Ethernet) Can be used with NC-485 network converter to enhance network capability Learn More
    $237.38

  24. Keri Systems NC-485X Network Converter

    Keri Systems NC-485X Network Converter

    Keri Systems NC-485 Network Converter by using Keri's LAN-520 LAN Port in combination with an NC-485 Network Converter, PXL-500 Tiger II Controllers, which are normally connected via a two-wire RS-485 network, can be connected via Ethernet to bridge long distances within a facility or campus, as well as across any distance where a LAN/WAN exists. This allows customers to combine what would normally be separate sites, each with their own RS-485 network, into a single site for better security management, whether across a corporate campus or across town. Typically, access controllers within a building or group of buildings would be connected using an RS-485 network. If cabling to another building is cost-prohibitive or impossible, but an Ethernet backbone exists between them, the connection can be made by using the LAN-520 LAN Port and NC-485 Network Converter on network segment, which converts the RS-485 network data to an Ethernet packet, then back to RS-485 where the network can be continued. If the customer choses not to run any RS-485 networking, all controllers can be connected via TCP/IP to take advantage of the existing Ethernet LAN/WAN. Learn More
    $66.30

  25. Lantronix USD1100 One-Port Device Server Ethernet Converter

    Lantronix USD1100 One-Port Device Server Ethernet Converter

    Device networking is what powers M2M (machine to machine) communication. The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes! This single-port external device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network. Learn More
    $178.13

  26. Marks 173-BIO USB Cable

    Marks 173-BIO USB Cable

    Marks 173-BIO USB Cable for Biometric Lock Learn More
    $19.25

    Out of stock

  27. Marks i-Dat EA6200 MARK2 USB Unit w/ Memory Stick

    Marks i-Dat EA6200 MARK2 USB Unit w/ Memory Stick

    i-Que audit trails can be downloaded and programming changes can be made with the i-Dat infra-red read/write device. This is a hand-held unit that communicates with enabled i-Que models and has a 4-line display showing the lock ID and serial number, current time, day and date, battery status and number of events downloaded. Learn More
    $372.38

  28. Paxton 380-592-US Net2Air USB Dongle

    Paxton 380-592-US Net2Air USB Dongle

    The Paxton Net2Air USB dongle enables PC software to exchange data with Paxton Access products that communicate using Net2Air wireless technology. It is a short range Net2Air bridge device. Learn More
    $101.39

  29. Paxton 477-268-US Net2Air USB bridge

    Paxton 477-268-US Net2Air USB bridge

    The Net2 nano range of access control units uses Paxton Access" Net2Air wireless technology to communicate with the Net2 software. The Net2Air USB bridge provides the wireless communication link between the PC running Net2 software and Net2 nano control units. We recommend the use of the Net2Air site surveyor kit for checking signal strength around a site prior to installation. Learn More
    $136.50

  30. Schlage ANT400-REM-CEILING AD-Series Remote Antenna For Wireless System

    Schlage ANT400-REM-CEILING AD-Series Remote Antenna For Wireless System

    The Schlage ANT400-REM optional remote antennas are designed for use with the AD-400 Series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD-Series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400 which is sometimes located around a corner or behind a wire mesh or thick brick construction material. Learn More
    $176.00

    Out of stock

Items 1 to 30 of 52 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2

What is M2M?

The concept of m2m, or machine to machine communication, is simply how your access system communicates. It concerns technologies that can provide both wired and wireless communication routes from one device to the other. It can transmit personal data such as employee ID for prox card readers, as well as keycards and other keyless entry and electronic lock information. This can allow you to have an outside, editable database of information that gives you advanced control over your entryway access. 

In wired technology, machine to machine interface communications promotes technology like Ethernet cables, which can ultimately benefit a wireless Wi-Fi connection. Additionally, wireless m2m can be beneficial insofar as companies that don’t already have a built in wired structure can easily adapt to the new implementation.

Gateway Interface Module

A gateway interface module is optimal for multi-door functions, as it provides a central unit for which to control all of your entryways at once, rather than programming each on individually. 

Our Trilogy Networx communicate through Ethernet or Wi-Fi, and give you the advanced accessibility of programming and storage—providing all of the standard functionality that comes with a standalone unit.

USB Interface

USB interface communication modules, such as Alarm Lock’s AL-PCI2U, allow you to connect with your PC, and transfer data across multiple platforms. This can provide you with multi-function use in your keypad locks as well as control from a notebook or desktop PC. They provide a large amount of memory to match your systems needs, and help to give you unified access control.

Hand Held Programmer

A hand held programmer can be useful because then you have the added freedom of mobility. Unlike a standard television remote, the hand held programmers, like the Keri Systems HPP-22, uses radio frequencies, so that you do not need a direct line of sight. Which means that you can have control where you need it, maintaining the essential purpose of the remote access software.

For all of our communication interface products, we encourage our customers with specific needs to take advantage of our search tools. Just enter the specific product that you need, and you should find a vast inventory waiting for you of exactly what replacement or new part you want. If it’s not available, please contact one of our service representatives and we will get it to you as fast as possible. Thanks for choosing Buy Access!