Door Hardware
Door Hardware consists of door closers, door accessories, exit devices, exit device trims, key storage, key machines, pivots, tools, and other products applicable for use on a single door.
-
Adams Rite 3889-08 Removable Mullion For 8' Height Door
Adams Rite 3889-08 Removable Mullion for doors up to 8' in height Learn More$207.00 -
Adams Rite 3889-10 Removable Mullion For 10' Height Door
Adams Rite 3889-10 Removable Mullion for doors up to 10' in height Learn More$230.06 -
Adams Rite 3890-08 Removable Aluminum Mullion For 8800 Exit Device
Adams Rite 3890-08 Aluminum Mullion for doors up to 8' in height Learn More$289.13 -
Dorma 1330 Steel Mullion
Removable mullions are used with paired doors where a full-width opening is only occasionally required. Doors are fitted with rim exit devices and normally function as single doors. Available in 8' length. Learn More$227.38 -
Glynn Johnson 103H-ADJ Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 103H-ADJ Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$213.19 -
Glynn Johnson 103HP-ADJ Internal Hold-Open Concealed Overhead Door Holder
Glynn Johnson 103HP-ADJ Internal Hold-Open. These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 101HP-ADJ have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. Learn More$218.81 -
Glynn Johnson 104H-ADJ Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 104H-ADJ Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$218.81 -
Glynn Johnson 104S-ADJ Stop-Only Concealed Overhead Door Stop w/ Adjustable Jamb Bracket
Glynn-Johnson 104S-ADJ Stop-Only w/ Adjustable Jamb Bracket. When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors. Learn More$232.75 -
Glynn Johnson 792H Hold-Open Surface Overhead Door Holder
Glynn Johnson 792H Hold-Open provide a selective Hold-Open function with easy-to-adjust tension. A simple 90º rotation of the roller mechanism disables the Hold-Open function, allowing the unit to serve as a shock-absorbing stop. The Hold-Open function provides a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. 792H provide a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the bar. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 792S Stop-Only Surface Overhead Door Stop
Glynn Johnson 792S Stop-Only. When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 793H Hold-Open Surface Overhead Door Holder
Glynn Johnson 793H Hold-Open provide a selective Hold-Open function with easy-to-adjust tension. A simple 90º rotation of the roller mechanism disables the Hold-Open function, allowing the unit to serve as a shock-absorbing stop. The Hold-Open function provides a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. 793H provide a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the bar. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 793S Stop-Only Surface Overhead Door Stop
Glynn Johnson 793S Stop-Only. When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 794H Hold-Open Surface Overhead Door Holder
Glynn Johnson 794H Hold-Open provide a selective Hold-Open function with easy-to-adjust tension. A simple 90º rotation of the roller mechanism disables the Hold-Open function, allowing the unit to serve as a shock-absorbing stop. The Hold-Open function provides a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. 794H provide a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the bar. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 794S Stop-Only Surface Overhead Door Stop
Glynn Johnson 794S Stop-Only. When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$271.13 -
Glynn Johnson 795H Hold-Open Surface Overhead Door Holder
Glynn Johnson 795H Hold-Open provide a selective Hold-Open function with easy-to-adjust tension. A simple 90º rotation of the roller mechanism disables the Hold-Open function, allowing the unit to serve as a shock-absorbing stop. The Hold-Open function provides a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. 795H provide a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the bar. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 795S Stop-Only Surface Overhead Door Stop
Glynn Johnson 795S Stop-Only. When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Glynn Johnson 796H Hold-Open Surface Overhead Door Holder
Glynn Johnson 796H Hold-Open provide a selective Hold-Open function with easy-to-adjust tension. A simple 90º rotation of the roller mechanism disables the Hold-Open function, allowing the unit to serve as a shock-absorbing stop. The Hold-Open function provides a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. 796H provide a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the bar. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$271.13 -
Glynn Johnson 796S Stop-Only Surface Overhead Door Stop
Glynn Johnson 796S Stop-Only. When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. The 79 series models incorporate the basic characteristics of the 70 series, but can protect extremely heavy or large doors subject to violent use or abusive conditions (i.e., vault doors, cell doors, oversized plant entry doors). Learn More$262.13 -
Hager 780-057-95 Standard Duty Full Surface Continuous Hinge
Hager 780-057-95 Standard Duty Full Surface Continuous Hinge Learn More$211.19 -
Hager 780-057HD-83 Heavy Duty Full Surface Continuous Hinge
Hager 780-057HD-83 Heavy Duty Full Surface Continuous Hinge Learn More$206.19 -
Hager 780-057HD-95 Heavy Duty Full Surface Continuous Hinge
Hager 780-057HD-95 Heavy Duty Full Surface Continuous Hinge Learn More$258.85 -
Monarch 2923-8 Removable Mullion 8' Door Opening
The 2923-8 steel mullions are for use with all Monarch devices on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage and sag. Regulates the flow of in-and-out traffic. Learn More$214.31 -
Monarch 4023-7 Removable Mullion 7' Door Opening
The Monarch 4023-7 steel mullions are for use with all Monarch devices on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage and sag. Regulates the flow of in-and-out traffic. Learn More$223.31 -
Monarch 4023-8 Removable Mullion 8' Door Opening
The Monarch 4023-8 steel mullions are for use with all Monarch devices on double door openings. Advantage: Increased security and tighter closure. Minimizes door warpage and sag. Regulates the flow of in-and-out traffic. Learn More$241.88 -
Norden 436 Police Lock Locking Bar
The Norden 436 Police Lock, featuring dual horizontally mounted locking bars, provides a clean contemporary design for doors requiring a high level of security and resistance to break-ins. A positive barrier discouraging break-ins is created by the 2-point locking system which thwarts burglars by projecting 3/8" x 1-1/2" deadbolts 1-1/2" deep into both sides of the door frame (jamb).The deadbolts are extended and retracted with just one simple action of the turn lever. Built-in signage indicates how to rotate the turn lever while indicating the status of the lock (“Locked” or “Unlocked”). The Norden Police Lock is well suited anywhere heavyduty, reliable operation is a requirement.The heavy-duty chassis and parts provide superior durability.The smooth, reduced body projection and center cover ramp design minimizes catch hazards. Units are non-handed and are designed for single doors, or double doors with a permanent center mullion. Learn More$270.00 -
Norden 448 Police Lock Locking Bar
The Norden 438 Police Lock, featuring dual horizontally mounted locking bars, provides a clean contemporary design for doors requiring a high level of security and resistance to break-ins. A positive barrier discouraging break-ins is created by the 2-point locking system which thwarts burglars by projecting 3/8" x 1-1/2" deadbolts 1-1/2" deep into both sides of the door frame (jamb).The deadbolts are extended and retracted with just one simple action of the turn lever. Built-in signage indicates how to rotate the turn lever while indicating the status of the lock (“Locked” or “Unlocked”). The Norden Police Lock is well suited anywhere heavyduty, reliable operation is a requirement.The heavy-duty chassis and parts provide superior durability.The smooth, reduced body projection and center cover ramp design minimizes catch hazards. Units are non-handed and are designed for single doors, or double doors with a permanent center mullion. Learn More$292.50 -
Precision 811 Removable Mullion
The Mullion is used to adapt a double door opening to two single door openings with Rim Exit Devices. When the full width of an opening is required, the mullion may be removed. Learn More$295.63 -
Rixson 9-526 Checkmate Heavy Duty Door Hold Open Holder
Checkmate® overhead stops and holders are used to extend the life of the door, frame and any door closing devices. They may be necessary if there are strong winds, high traffic or abuse. Learn More$203.63 -
Rixson 9-536 Checkmate Heavy Duty Door Open Function
Checkmate® overhead stops and holders are used to extend the life of the door, frame and any door closing devices. They may be necessary if there are strong winds, high traffic or abuse. Learn More -
Rixson 996 Wall Mounted Electromagnetic Door Release
Electromagnetic door holder/releases are designed for virtually any remote door release applications. They must be used in conjunction with closing devices. • Fire/smoke barrier doors – Door releases when tripped by an alarm or smoke detector • Private offices – Door releases when triggered by a remote switch • All devices come with a wall/floor portion and a door portion (armature) • Circuit normally closed • Door portions have screws and plates to accommodate surface and concealed mounting Learn More$204.19
