Door Hardware
Door Hardware consists of door closers, door accessories, exit devices, exit device trims, key storage, key machines, pivots, tools, and other products applicable for use on a single door.
-
ABH 1023 Heavy Duty Overhead Surface Mount Door Stop
ABH 1023 Heavy Duty Overhead Surface Mount Door Stop Learn More$151.50 -
ABH 2100 Recessed Wall Mount Electro-Magnetic Door Holder/Release
ABH 2100 For use on fire/smoke barrier doors hold open until released by a remote switching device. Can also be used to just hold door. Learn More$142.50 -
ABH 9024 Heavy Duty Overhead Surface Mount Door Stop
ABH 9024 Heavy Duty Overhead Surface Mount Door Stop Learn More$150.75 -
Adams Rite 1877 Cylinder-Operated Flushbolt For Wood Doors
Adams Rite 1877 Designed for use instead of conventional flip-lever operated flushbolts, the 1877 gives building management key control of the inactive leaf of paired doors. Prevents casual locking of the inactive leaf by children or other unauthorized persons. Uses same basic overcenter action mechanism as MS® pivoted bolt locks. Recommended for installation at both top and bottom of inactive door with MS1837 in active door for greatest security Learn More$104.70 -
Adams Rite 4550L-01 MS Deadbolt Lever (LH or LHR)
Adams Rite 4550 Easy unlocking of any MS deadbolt by approximately 3 lbs. downward force on a 3" lever. Lever is spring loaded to horizontal, relocks with upward motion. Indicator signals lock status. Can be installed in place of existing key cylinder or cylinder type thumb-turn on inside of door. Learn More$102.38 -
Adams Rite 4550R-01 MS Deadbolt Lever (RH or RHR)
Adams Rite 4550 Easy unlocking of any MS deadbolt by approximately 3 lbs. downward force on a 3" lever. Lever is spring loaded to horizontal, relocks with upward motion. Indicator signals lock status. Can be installed in place of existing key cylinder or cylinder type thumb-turn on inside of door. Learn More$102.38 -
Adams Rite 4570S-01 ICU Lever Set Latch Operator (Lock 5017 Included)
The 4570 Latch Operator utilizes the Adams Rite 5017 or MS1847 Series of deadlatches, known for their durability and strength-in-small-packages. The handles can be installed either up or down to suit the preference of the user. Rugged construction ensures dependable performance, with a high-wear spring to return the handles to position after use. Installation is a simple operation, too. All pieces are easy to install and include solid-contact activators to engage the deadlatch on either side. For hospital ICU wards or other applications that require quick access, the new 4570 Latch Operator provides a cure. Learn More$117.91 -
Adams Rite 4591M Deadlatch Paddle w/ Monitor Switch
Adams Rite 4591M An alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one - just push or pull in the direction the door swings. Available for any Adams Rite Series 4500/4900 deadlatch or MS+1890 lock/latch. Learn More$114.95 -
Adams Rite 4591MA Deadlatch Active Paddle w/ Switch
The Adams Rite 4591MA is an alternative to knob or lever handles. Makes opening a latched door as natural as opening an unlatched one - just push or pull in the direction the door swings. Available for any Adams Rite Series 4500/4900 deadlatch or MS+1890 lock/latch. Learn More$122.55 -
Adams Rite 4781-021 Two-Point Deadlatch With Paddle For Aluminum Stile Doors (Push To Left)
Designed for paired outswinging narrow stile glass doors but also suitable for single doors. Instead of operating a convential horizontal-throw latchbolt, the 4781 latches to header and threshold. This allows both door leaves to be "active". There is no need to pin one door with flushbolts or other devices. The paddles are a modified version of the 4591 and the concealed vertical rod mechanism is the same as used in Adams Rite's 8600 exit device. Note, however, that the 4781 is not intended to substitute for an exit device, which must have a door-spanning bar. Learn More$160.88 -
Adams Rite 4781-041 Two-Point Deadlatch With Paddle For Aluminum Stile Doors (Push To Right)
Designed for paired outswinging narrow stile glass doors but also suitable for single doors. Instead of operating a convential horizontal-throw latchbolt, the 4781 latches to header and threshold. This allows both door leaves to be "active". There is no need to pin one door with flushbolts or other devices. The paddles are a modified version of the 4591 and the concealed vertical rod mechanism is the same as used in Adams Rite's 8600 exit device. Note, however, that the 4781 is not intended to substitute for an exit device, which must have a door-spanning bar. Learn More$160.88 -
Dorma EM504 24120 Electromagnetic Door Holder Semi-Flush Wall-Mount
The Dorma EM Series door holders are composed of a door mounted catch plate and a floor- or wall-mounted electromagnet. This series serves as an economical package for use in conjunction with DORMA door closers whenever controlled release and closing of doors is necessary for safety or convenience such as in hotels, hospitals, and nursing homes. Learn More$178.75 -
Dorma EM505 24120 Electromagnetic Door Holder Semi-Flush Wall-Mount
The Dorma EM Series door holders are composed of a door mounted catch plate and a floor- or wall-mounted electromagnet. This series serves as an economical package for use in conjunction with DORMA door closers whenever controlled release and closing of doors is necessary for safety or convenience such as in hotels, hospitals, and nursing homes. Learn More$178.75 -
Dorma EM508 24120 Electromagnetic Door Holder Surface Wall-Mount
The Dorma EM Series door holders are composed of a door mounted catch plate and a floor- or wall-mounted electromagnet. This series serves as an economical package for use in conjunction with DORMA door closers whenever controlled release and closing of doors is necessary for safety or convenience such as in hotels, hospitals, and nursing homes. Learn More$189.75 -
Glynn Johnson 101F Friction Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 101F Friction Hold-Open. Friction Hold-Open models provide an alternative holding method, ideal for heavy patient room doors, closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension is adjusted using an allen wrench and an open end wrench. The friction tension adjustment is located on the top of the slider in the channel. Learn More$181.69 -
Glynn Johnson 101H Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 101H Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$181.69 -
Glynn Johnson 101HP Internal Hold-Open Concealed Overhead Door Holder
Glynn Johnson 101HP Internal Hold-Open. These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 101HP have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. Learn More$181.69 -
Glynn Johnson 101S Stop-Only Concealed Overhead Door Stop
Glynn-Johnson 101S Stop-Only. When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors. Learn More$181.69 -
Glynn Johnson 102F Friction Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 102F Friction Hold-Open. Friction Hold-Open models provide an alternative holding method, ideal for heavy patient room doors, closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension is adjusted using an allen wrench and an open end wrench. The friction tension adjustment is located on the top of the slider in the channel. Learn More$181.69 -
Glynn Johnson 102H Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 102H Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$181.69 -
Glynn Johnson 102HP Internal Hold-Open Concealed Overhead Door Holder
Glynn Johnson 102HP Internal Hold-Open. These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 102HP have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. Learn More$181.69 -
Glynn Johnson 102S Stop-Only Concealed Overhead Door Stop
Glynn-Johnson 102S Stop-Only. When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors. Learn More$181.13 -
Glynn Johnson 103F Friction Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 103F Friction Hold-Open. Friction Hold-Open models provide an alternative holding method, ideal for heavy patient room doors, closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension is adjusted using an allen wrench and an open end wrench. The friction tension adjustment is located on the top of the slider in the channel. Learn More$181.69 -
Glynn Johnson 103H Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 103H Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$181.13 -
Glynn Johnson 103HP Internal Hold-Open Concealed Overhead Door Holder
Glynn Johnson 103HP Internal Hold-Open. These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 103HP have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. Learn More$181.69 -
Glynn Johnson 103S Stop-Only Concealed Overhead Door Stop
Glynn-Johnson 103S Stop-Only. When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors. Learn More$187.88 -
Glynn Johnson 104F Friction Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 104F Friction Hold-Open. Friction Hold-Open models provide an alternative holding method, ideal for heavy patient room doors, closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension is adjusted using an allen wrench and an open end wrench. The friction tension adjustment is located on the top of the slider in the channel. Learn More$181.69 -
Glynn Johnson 104H Hold-Open Concealed Overhead Door Holder
Glynn-Johnson 104H Hold-Open. The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. Learn More$181.69 -
Glynn Johnson 104HP Internal Hold-Open Concealed Overhead Door Holder
Glynn Johnson 104HP Internal Hold-Open. These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 104HP have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. Learn More$181.69 -
Glynn Johnson 104S Stop-Only Concealed Overhead Door Stop
Glynn-Johnson 104S Stop-Only. When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors. Learn More$181.69
