Door Hardware
Door Hardware consists of door closers, door accessories, exit devices, exit device trims, key storage, key machines, pivots, tools, and other products applicable for use on a single door.
-
Dorma ED800 J Top Jamb Low Energy Door Operator
The Dorma ED800 J is "simple to install", “low energy” door operator that does not require external safety devices. The opening speeds and forces are tailored to meet the needs of the physically challenged. Opening force never exceeds 15 lbf. Closing time is never less than 3 seconds from 90º to 10º, nor less than 1.5 seconds from 10º to closed. DORMA has achieved a technological breakthrough an intelligent door closer, designed solely to provide safe, barrier free access. Learn More$2,526.19 -
LCN 4642-STD Electric Auto Equalizer Low Energy Power Door Operator (Push Side)
The LCN 4642-STD Auto Equalizer is a smart and reliable electrically powered low-energy power operator. It provides easy access for people with disabilities, the elderly, or the frail. Designed primarily for manual opening applications that occasionally require automatic opening. Learn More$2,866.88 -
Norton 5740-RF1 LEO Universal Unit Push Or Pull Side Mounting Low Energy Door Operator w/ Radio Frequency
Norton’s 5740-RF1 is the latest generation of power door operators. Low energy door operators were once considered a necessity only for those with physical challenges. Today, due to the population’s busy lifestyles, the convenience of “hands-free” door opening is more popular than ever. The patented design of LEO is based on ease and simplicity. LEO installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Learn More$2,042.63 -
Norton 5930 Stop Push Side Of Door Low Energy Door Operator
The Norton 5930 is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for push-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5930 is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,028.13 -
Norton 6920 Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6920 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,612.50 -
Norton 6920-RF1 Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6920 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,728.13 -
Norton 6930 Standard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6930 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,612.50 -
Norton 6930-RF1 Standard-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6930-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,728.13 -
Norton 6960 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6960 Series PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,721.88 -
Norton 6960-RF1 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6960-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,837.50 -
Sargent 3051-RF MPower Low Energy Door Operator Double Lever Arm w/ RF Receiver (Push)
MPower 3051-RF introduces a new generation of power door operators. The patented design of MPOWER 3000 is based on ease and simplicity. MPOWER 3000 installs in minutes rather than hours and consists of three basic components: inverter, motor and a standard door closer body. When the door is opened manually, there is little resistance and the drive trains and motor are not engaged. The closer, not the motor, controls the closing cycle. Learn More
