Automatic
An automatic door closer (more often called a "door opener") opens the door itself, typically under the control of a push button, motion detector or other device, and then closes it as well, typically employing a motion or proximity detector to determine when it is safe to close the door.
-
Norton 5740-RF1 LEO Universal Unit Push Or Pull Side Mounting Low Energy Door Operator w/ Radio Frequency
Norton’s 5740-RF1 is the latest generation of power door operators. Low energy door operators were once considered a necessity only for those with physical challenges. Today, due to the population’s busy lifestyles, the convenience of “hands-free” door opening is more popular than ever. The patented design of LEO is based on ease and simplicity. LEO installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Learn More$2,042.63 -
Norton 5910 Hinge Pull Side Of Door Low Energy Door Operator
The Norton 5910 is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5910 is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,028.13 -
Norton 5910-RF Hinge Pull Side Of Door Low Energy Door Operator w/ Radio Frequency
The Norton 5910-RF is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5910-RF is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,143.75 -
Norton 5930 Stop Push Side Of Door Low Energy Door Operator
The Norton 5930 is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for push-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5930 is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,028.13 -
Norton 5930-RF Stop Push Side Of Door Low Energy Door Operator w/ Radio Frequency
The Norton 5930-RF is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for push-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5930-RF is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,143.75 -
Norton 6010 Hinge Pull Rigid Arm & Slide Track PowerMatic Low Energy Door Operator
The 6010, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. Available for pull side mounting, the 6010 can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,527.25 -
Norton 6020 Stop Push Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
The 6020, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. Available for push side mounting, the 6020 can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,386.25 -
Norton 6030 Stop Push Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
The 6030, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. Available for push side mounting, the 6030 can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,386.25 -
Norton 6050 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator
The 6050, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. 6050 Series can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,570.00 -
Norton 6070 Stop Push Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator
The 6070, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. Available for push side mounting, the 6070 can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,527.25 -
Norton 6910 Rigid Arm & Slide Track PowerMatic Low Energy Door Operator
Norton's 6910 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,721.88 -
Norton 6910-RF1 Rigid Arm & Slide Track PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6910 RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,837.50 -
Norton 6920 Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6920 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,612.50 -
Norton 6920-RF1 Stardard-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6920 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,728.13 -
Norton 6930 Standard-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6930 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,612.50 -
Norton 6930-RF1 Standard-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6930-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,728.13 -
Norton 6950 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator
Norton's 6950 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,754.38 -
Norton 6950-RF1 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6950-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,870.00 -
Norton 6960 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6960 Series PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,721.88 -
Norton 6960-RF1 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6960-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,837.50 -
Norton 6970 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator
Norton's 6970 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$3,135.60 -
Norton 6970-RF1 Heavy-Duty Double Lever Arm PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6970-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for push mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More
