Automatic
An automatic door closer (more often called a "door opener") opens the door itself, typically under the control of a push button, motion detector or other device, and then closes it as well, typically employing a motion or proximity detector to determine when it is safe to close the door.
-
Sargent 351-ETH Push Or Pull Electromechanical Closer-Holder Release Device
The Sargent 351-ETH Electromechanical Closer-Holder Release Devices is designed to hold open fire rated doors until power is interrupted by a fire alarm condition or remote release switch. With it’s rugged track design, the 351 EHT is suitable for multiple manual operations. It is also applicable for non-rated doors such as offices or conference rooms, where the convenience of an electrically controlled closer-holder device may be desirable. Designed for easy installation in Pull and Push applications, the non-handed track, closer body and dual voltage input makes it easy to specify and install. Common applications are cross corridor and stairwell doors. An auxiliary door stop is required at hold open point. Learn More$515.03 -
Sargent 3060-RF MPower Low Energy Door Operator Rigid Arm w/ RF Receiver (Pull)
MPower 3060-RF introduces a new generation of power door operators. The patented design of MPOWER 3000 is based on ease and simplicity. MPOWER 3000 installs in minutes rather than hours and consists of three basic components: inverter, motor and a standard door closer body. When the door is opened manually, there is little resistance and the drive trains and motor are not engaged. The closer, not the motor, controls the closing cycle. Learn More -
Sargent 3060 MPower Low Energy Door Operator Rigid Arm (Pull)
MPower 3060 introduces a new generation of power door operators. The patented design of MPOWER 3000 is based on ease and simplicity. MPOWER 3000 installs in minutes rather than hours and consists of three basic components: inverter, motor and a standard door closer body. When the door is opened manually, there is little resistance and the drive trains and motor are not engaged. The closer, not the motor, controls the closing cycle. Learn More -
Rixson 0600 Electrified Door Closer/Holder
Rixson was the first architectural hardware company to have fire/life-safety closers and holders. It remains an industry leader with several distinctly different holding devices. The Smok-Chek V Series serve many purposes. The models come as detectored with a built in smoke detector or non-detectored models which would be connected only to the alarm system. BE ADVISED THAT THESE PRODUCTS ARE NOT DESIGNED TO BE MANUALLY PULLED OUT OF HOLD OPEN. If continual cycling is necessary use a separate switch to release. Learn More$402.75 -
Norton 7705PTO-24V Support Unit Pull Side Power Track Electromechanical Closer-Holder
The Norton 7705PTO Power Track® Closer-Holders combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations. The Power Track is an aluminum extrusion which incorporates a solenoid actuated cam that locks the arm slide in the track at a selected point. The degree of door hold open is selected by adjustment of the telescoping arm. When there is power to the unit, the door will hold open at the selected hold open point. Any power interruption will release the arm slide and the door will close. The door can be released manually at any time. Learn More$480.63 -
Norton 7705PTDO Master Unit w/ Integral Smoke Detector Power Track Electromechanical Closer-Holder
The Norton Power Track® Closer-Holders combine the functions of a single point electromechanical door holder with the proven reliability of a 7705PTDO Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations. The Power Track is an aluminum extrusion which incorporates a solenoid actuated cam that locks the arm slide in the track at a selected point. The degree of door hold open is selected by adjustment of the telescoping arm. When there is power to the unit, the door will hold open at the selected hold open point. Any power interruption will release the arm slide and the door will close. The door can be released manually at any time. Learn More$1,076.88 -
Norton 7245MPO Support Unit Connected Free Swing Arm Electromechanical Closer/Holder Releasing Device
The 7245MPO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. The connected free swing arm assembly provides the convenient automatic closing fire door protection for health care facilities or other locations where it is desired to neutralize the effort required to open or close a door. With no spring force on the door during the normal operation, patients, the handicapped and/or staff find the door easy to open, close or leave ajar. Learn More$647.50 -
Norton 7245MPDO Master Unit Connected Free Swing Arm Electromechanical Closer/Holder Releasing Device
The 7245MPDO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. The connected free swing arm assembly provides the convenient automatic closing fire door protection for health care facilities or other locations where it is desired to neutralize the effort required to open or close a door. With no spring force on the door during the normal operation, patients, the handicapped and/or staff find the door easy to open, close or leave ajar. Learn More$1,260.00 -
Norton 7244MPI Support Unit Connected Free Swing Arm Electromechanical Closer/Holder Releasing Device
The 7244MPI Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Infinite Hold Open: The door will hold open at any degree of opening up to 175° with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Infinite Hold Open can be set in the field by turning the cam. The connected free swing arm assembly provides the convenient automatic closing fire door protection for health care facilities or other locations where it is desired to neutralize the effort required to open or close a door. With no spring force on the door during the normal operation, patients, the handicapped and/or staff find the door easy to open, close or leave ajar. Learn More$543.13 -
Norton 7244MPDI Master Unit Connected Free Swing Arm Electromechanical Closer/Holder Releasing Device
The 7244MPDI Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Infinite Hold Open: The door will hold open at any degree of opening up to 175° with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Infinite Hold Open can be set in the field by turning the cam. The connected free swing arm assembly provides the convenient automatic closing fire door protection for health care facilities or other locations where it is desired to neutralize the effort required to open or close a door. With no spring force on the door during the normal operation, patients, the handicapped and/or staff find the door easy to open, close or leave ajar. Learn More$1,076.25 -
Norton 7243MPDI Master Unit Connected Free Swing Arm Electromechanical Closer/Holder Releasing Device
The 7243MPDI Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Infinite Hold Open: The door will hold open at any degree of opening up to 175° with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Infinite Hold Open can be set in the field by turning the cam. The connected free swing arm assembly provides the convenient automatic closing fire door protection for health care facilities or other locations where it is desired to neutralize the effort required to open or close a door. With no spring force on the door during the normal operation, patients, the handicapped and/or staff find the door easy to open, close or leave ajar. Learn More$1,076.25 -
Norton 7224MPO Support Unit Double Lever Arm Electromechanical Closer/Holder Releasing Device
The 7224MPO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. Learn More$622.50 -
Norton 7224MPDO Master Unit Double Lever Arm Electromechanical Closer/Holder Releasing Device
The 7224MPDO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. Learn More$1,235.00 -
Norton 7224MPDI Master Unit Double Lever Arm Electromechanical Closer/Holder Releasing Device
The 7224MPDI Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Infinite Hold Open: The door will hold open at any degree of opening up to 175° with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Infinite Hold Open can be set in the field by turning the cam. Learn More$1,076.25 -
Norton 7214MPO Support Unit Slide Track Electromechanical Closer/Holder Releasing Device
The 7214MPO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. Learn More$622.50 -
Norton 7214MPDO Master Unit Slide Track Electromechanical Closer/Holder Releasing Device
The 7214MPDO Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Selective Hold Open (Standard): The door will hold open at any degree of opening beyond a pre-set hold open point, up to 175°, with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Factory set at 80°, but is adjustable to virtually any degree of door opening desired. Learn More$1,235.00 -
Norton 7213MPI Support Unit Slide Track Electromechanical Closer/Holder Releasing Device
The 7213MPI Electromechanical Closer/Holders combine the functions of an electromechanical door holder with the 7700 series door closer. Infinite Hold Open: The door will hold open at any degree of opening up to 175° with a maximum allowable door opening of 180° (the exception is series 7250 which opens to 110º). Infinite Hold Open can be set in the field by turning the cam. Learn More$543.13 -
Norton 6950-RF1 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6950-RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,870.00 -
Norton 6950 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator
Norton's 6950 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,754.38 -
Norton 6910-RF1 Rigid Arm & Slide Track PowerMatic Low Energy Door Operator w/ Radio Frequency Control
Norton's 6910 RF1 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,837.50 -
Norton 6910 Rigid Arm & Slide Track PowerMatic Low Energy Door Operator
Norton's 6910 PowerMatic® is a “low energy” power door operator designed to automatically open and close doors with a lower energy opening force. Unlike high energy operators that require guide rails, safety mats and sensors, low energy operators only require signage. The PowerMatic is easy to adjust, available for pullside mounting and offers obstruction detection during both opening and closing cycles. This operator is ideal for executive offices, retirement homes, educational and assisted living facilities, office/warehouse corridor doors, etc. Learn More$2,721.88 -
Norton 6050 Double Egress Arm & Slide Track PowerMatic Low Energy Door Operator
The 6050, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. 6050 Series can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,570.00 -
Norton 6010 Hinge Pull Rigid Arm & Slide Track PowerMatic Low Energy Door Operator
The 6010, the newest addition to the PowerMatic® Family of Operators combines intelligence, reliability and superior control in one package. Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems. Designed for moderate to high traffic applications, this operator has a two-piece sub-assembly for easy installation and LCD screen for clear and accurate read-out of operator settings. Available for pull side mounting, the 6010 can be operated manually or activated via wall switches or radio frequency devices. This reliable unit ensures consistent opening and closing based on dual mode, electrohydraulic technology and is ideal for hospitals, office buildings, sports arenas or government facilities. Learn More$3,527.25 -
Norton 5930-RF Stop Push Side Of Door Low Energy Door Operator w/ Radio Frequency
The Norton 5930-RF is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for push-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5930-RF is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,143.75 -
Norton 5910-RF Hinge Pull Side Of Door Low Energy Door Operator w/ Radio Frequency
The Norton 5910-RF is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5910-RF is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,143.75 -
Norton 5910 Hinge Pull Side Of Door Low Energy Door Operator
The Norton 5910 is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). The 5910 is simple to install and set up. “One touch” programming combined with the operators built-in ability to calibrate door mass, offers our customers a smart, dependable solution. Power Assist, Obstruction Detection, Motor Start Delay and Stop on Stall are just a few features that set this electromechanical operator apart from the competition. Ideal for senior housing/assisted living facilities, hospitals, office buildings, colleges or universities, places of worship, convention centers, etc Learn More$2,028.13 -
Norton 5710 LEO Hinge Pull Side Of Door Low Energy Door Operator
Norton’s 5710 is the latest generation of power door operators. Low energy door operators were once considered a necessity only for those with physical challenges. Today, due to the population’s busy lifestyles, the convenience of “hands-free” door opening is more popular than ever. The patented design of LEO is based on ease and simplicity. LEO installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Learn More -
Norton 5610-RF Pull Side Of Door Low Energy Door Operator w/ Radio Frequency
The 5600 Series, the newest addition to the POWERMATIC® Family of Operators, offers functionality and control at an affordable price. Ideal for retrofit applications, the 5600 Series converts interior, non-fire rated doors for ADA compliance easily and affordably and provides a simple way to achieve touchless environments in public restrooms. Furnished standard with a track assembly, the pull-side mounted unit can be operated manually or activated by wall switches, or radio frequency devices. Easy to install, set-up and adjust, the 5600 Series is perfect for ADA-compliant offices, classrooms and dorm rooms, and touch free applications like public restrooms, labs and examination rooms. Learn More$981.25 -
Norton 5610 Pull Side Of Door Low Energy Door Operator
The 5600 Series, the newest addition to the POWERMATIC® Family of Operators, offers functionality and control at an affordable price. Ideal for retrofit applications, the 5600 Series converts interior, non-fire rated doors for ADA compliance easily and affordably and provides a simple way to achieve touchless environments in public restrooms. Furnished standard with a track assembly, the pull-side mounted unit can be operated manually or activated by wall switches, or radio frequency devices. Easy to install, set-up and adjust, the 5600 Series is perfect for ADA-compliant offices, classrooms and dorm rooms, and touch free applications like public restrooms, labs and examination rooms. Learn More$906.25 -
LCN 4314ME-SF Sentronic Heavy Duty Electrically Controlled Closer/Holder
The 4314ME-SF SENTRONIC® is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door is held open until current interruption releases mechanism and the door closes. Single lever (track) arm closer is specifically designed for interior doors. Learn More$594.56
