• Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees.
• Disassembly of lockset for cylinder removal shall not be required. Cylinder shall be changed by removing the lever
• Lever design: Broadway Handle
• Finish: 626 US26D 26D Satin Chromium Plated
|Manufacturer||Arrow Lock And Door Hardware|
|Lock Functions||W01 - Passage - Latchbolt operated by lever either side.|
|Door Thickness||1-3/4" (44.45 mm) standard|
|Backset||2-3/4" (69.85 mm) backset standard|
|Case||Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Requires standard 2-1/8" (53.97 mm) bore through door|
|Latchbolt||Brass, bronze, or stainless steel. 2-1/4" (17.11 mm) x 1-1/8" (28.57 mm), beveled 1/8" (3.175 mm) in 2" (50.80 mm)|
|Strikes||Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip|
|Certifications||ANSI/BHMA A156.2, Series 4000, Grade 1|
|U.L. Listed||Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
Federal Specification FF-H-106C
ANSI A117.1 Accessibility Code
California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
|Warranty||Limited three year warranty|
Write Your Own Review
Questions on Arrow W01BRR-26D Passage Cylindrical Lever Lock Non-Keyed
No questions asked yet