Product Description
Details
• Lockset shall be equipped with OverDrive™, freewheeling feature whereby the latch retraction mechanism disengages from the lever handle allowing lever to move freely when locked, without retraction the latch.
• Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees.
• Disassembly of lockset for cylinder removal shall not be required. Cylinder shall be changed by removing the lever
• Q Series levers employ the unique flex-adapter which allows thru-bolting installation with pre-existing holes or new installation where conditions allow thru-bolting at any location.
• Lever design: Sierra Handle
• Finish: 626 US26D 26D Satin Chromium Plated
Additional Information
Additional Information
| Manufacturer | Arrow Lock And Door Hardware |
|---|---|
| Model | Q83SR-IC |
| Lock Functions | Q83 - Exterior - Dead locking latch bolt operated by lever from either side except when outside lever is locked by push button inside.When outside lever is locked, operating key in outside lever or operating inside lever unlocks push button and retracts latchbolt. Closing door does not release push button. |
| Door Thickness | 1-3/4" (44.45 mm) standard |
| Backset | 2-3/4" (69.85 mm) backset standard |
| Case | Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Requires standard 2-1/8" (53.97 mm) bore through door |
| Handing | Non-Handed |
| Keying/Keyways | Lockset prepared to use with 6 or 7 pin interchangeable core. Supplied less core, but packed with tailpiece. Will also accept cores manufactured by Best™, Falcon™, Medeco Keymark™, ASSA™, and others. |
| Latchbolt | Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required |
| Exposed Trim | Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks |
| Roses | Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation. |
| Strikes | Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip |
| Certifications | ANSI/BHMA A156.2, Series 4000, Grade 1 |
| U.L. Listed | Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors. Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface. |
| Warranty | Limited three year warranty |
| Weight | 7.0000 |
Reviews
Write Your Own Review
Product Tags
Product Questions
Questions on Arrow Q83SR-IC Exterior Cylindrical Lever Lock OverDrive w/ SFIC (Less Core)
No questions asked yet
Ask Your Own Question
Product Downloads
 |
Arrow Q Series Specification Sheet (Size: 1012.9 KB) |
