(888) 209-8167
M-F 9AM-5PM EST

You have no items in your shopping cart.

Arrow Q35SR-26D-IC Exterior Cylindrical Lever Lock Prep For SFIC (Less Core)

Be the first to review this product

Arrow’s Q35SR-IC Grade 1 cylindrical lever locks have been engineered for years of dependable operation.

Availability: In stock

$290.91

Free Ground Shipping on domestic orders over $200

Priority orders placed before 12PM PST will be shipped the same day. Standard orders will be shipped within 24 hours.

Most items (excluding special orders) can be returned or exchanged within 30 days. Please see our Return Policy for more details.

Have Questions? Chat with us at the bottom of the screen or call us at (888) 209-8167

Product Description

Details


• Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees.
• Disassembly of lockset for cylinder removal shall not be required. Cylinder shall be changed by removing the lever
• Q Series levers employ the unique flex-adapter which allows thru-bolting installation with pre-existing holes or new installation where conditions allow thru-bolting at any location.
• Lever design: Sierra Handle
• Finish: 626 US26D 26D Satin Chromium Plated

Additional Information

Additional Information

Manufacturer Arrow Lock And Door Hardware
Model Q35SR-26D-IC
Lock Functions Q35 - Exterior - Dead locking latch bolt operated by lever from either side except when both levers are locked by key from either side.
Door Thickness 1-3/4" (44.45 mm) standard
Backset 2-3/4" (69.85 mm) backset standard
Case Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Requires standard 2-1/8" (53.97 mm) bore through door
Handing Non-Handed
Keying/Keyways Lockset prepared to use with 6 or 7 pin interchangeable core. Supplied less core, but packed with tailpiece. Will also accept cores manufactured by Best™, Falcon™, Medeco Keymark™, ASSA™, and others.
Latchbolt Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required
Exposed Trim Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks
Roses Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation.
Strikes Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip
Compliances Federal Specification FF-H-106C
Certifications ANSI A117.1 Accessibility Code
U.L. Listed Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
CA State Fire Marshal California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
ANSI/BHMA ANSI/BHMA A156.2, Series 4000, Grade 1
Warranty Limited three year warranty
Weight 7.0000

Reviews

Write Your Own Review

You're reviewing: Arrow Q35SR-26D-IC Exterior Cylindrical Lever Lock Prep For SFIC (Less Core)

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

Questions on Arrow Q35SR-26D-IC Exterior Cylindrical Lever Lock Prep For SFIC (Less Core)

No questions asked yet

Ask Your Own Question