Product Description
Details
• Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees.
• Disassembly of lockset for cylinder removal shall not be required. Cylinder shall be changed by removing the lever
• Q Series levers employ the unique flex-adapter which allows thru-bolting installation with pre-existing holes or new installation where conditions allow thru-bolting at any location.
• Lever design: Broadway Handle
• Finishes: 606 US4 04 Satin Brass, 612 US10 10 Satin Bronze and 626 US26D 26D Satin Chromium Plated
Additional Information
Additional Information
| Manufacturer | Arrow Lock And Door Hardware |
|---|---|
| Model | Q12BRR-IC |
| Lock Functions | Q12 - Storeroom - Latchbolt operated by key in outside lever or by inside lever. Outside lever always rigid. |
| Door Thickness | 1-3/4" (44.45 mm) standard |
| Backset | 2-3/4" (69.85 mm) backset standard |
| Case | Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Requires standard 2-1/8" (53.97 mm) bore through door |
| Handing | Non-Handed |
| Keying/Keyways | Lockset prepared to use with 6 or 7 pin interchangeable core. Supplied less core, but packed with tailpiece. Will also accept cores manufactured by Best™, Falcon™, Medeco Keymark™, ASSA™, and others. |
| Latchbolt | Brass with 1/2" (12.7mm) throw standard. 3/4" (19.05mm) throw deadlocking firelatch is available for pairs of doors. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1" (25.4mm) bore in edge of door is required |
| Exposed Trim | Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks |
| Roses | Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation. |
| Strikes | Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip |
| Certifications | ANSI/BHMA A156.2, Series 4000, Grade 1 |
| U.L. Listed | Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors. Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface. |
| Warranty | Limited three year warranty |
| Weight | 7.0000 |
Reviews
Write Your Own Review
Product Tags
Product Questions
Questions on Arrow Q12BRR-IC Storeroom Cylindrical Lever Lock w/ SFIC Core (Less Core)
No questions asked yet
Ask Your Own Question
Product Downloads
 |
Arrow Q Series Specification Sheet (Size: 1012.9 KB) |
