(888) 209-8167
M-F 9AM-5PM EST

You have no items in your shopping cart.

Arrow ML81VR-26D Entrance/Office Cylindrical Lever OverDrive Conventional Cylinder

Be the first to review this product

Arrow’s ML81VR levers offer the designer, architect and contractor simple solutions to accessibility requirements. Their clean designs make them ideal for commercial applications where heavy duty grade one hardware may not be necessary.

Availability: In stock

$166.06

Free Ground Shipping on domestic orders over $200

Priority orders placed before 12PM PST will be shipped the same day. Standard orders will be shipped within 24 hours.

Most items (excluding special orders) can be returned or exchanged within 30 days. Please see our Return Policy for more details.

Have Questions? Chat with us at the bottom of the screen or call us at (888) 209-8167

Product Description

Details


• Freewheeling lever action occurs when latch retraction mechanism disengages from lever handle when lever is locked
• Built-in stops in the rose insert prevent lever from traveling beyond approximately 57 degrees
• Additional 40% spring power in rose insert on OverDrive™ side of door ensures that lever handle return to the horizontal position
• Arrow ML Series levers offer the designer, architect and contractor simple solutions to accessibility requirements
• Disassembly of lockset for cylinder removal shall not be required
• Cylinder shall be changed by removing the lever
• Lever design: Ventura Handle
• Finish: 626 US26D 26D Satin Chromium Plated

Additional Information

Additional Information

Manufacturer Arrow Lock And Door Hardware
Model ML81VR-26D
Lock Functions ML81 - Entrance/Office - Dead locking latch bolt operated by lever from either side except when outside lever is locked by pushing turn button inside. Key outside or operating inside lever releases turn button unlocking outside lever except when turn button had been rotated to keep outside lever locked. Inside turn button must be manually operated to unlock outside lever. Inside lever always operates latch bolt.
Door Thickness 1-3/8" (34.92mm) to 1-3/4" (44.45mm) standard
Backset 2-3/4" (69.85 mm) backset standard
Case Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Extended one piece bearing sleeve offers added support for interlocking stainless steel tubes and provides for extra lever rigidity. Requires standard 2-1/8" (53.97mm) bore through door
Handing Non-Handed
Keying/Keyways Supplied standard with Arrow “A” keyway, 6 pin cylinder
Latchbolt Brass, bronze or stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm). Available with 1" (25.4mm) front latch for 2-3/8" (60.32mm) backset or 1" front for 2-3/4" (69.85mm) backset
Exposed Trim Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks
Roses Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation.
Strikes Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip
Certifications ANSI/BHMA A156.2, Series 4000, Grade 2
U.L. Listed Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
Federal Specification FF-H-106C
ANSI A117.1 Accessibility Code
California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
Warranty Limited three year warranty
Weight 6.0000

Reviews

Write Your Own Review

You're reviewing: Arrow ML81VR-26D Entrance/Office Cylindrical Lever OverDrive Conventional Cylinder

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

Questions on Arrow ML81VR-26D Entrance/Office Cylindrical Lever OverDrive Conventional Cylinder

No questions asked yet

Ask Your Own Question