Product Description
Details
• Arrow ML Series levers offer the designer, architect and contractor simple solutions to accessibility requirements
• Disassembly of lockset for cylinder removal shall not be required
• Cylinder shall be changed by removing the lever
• Lever design: Sierra Handle
• Finishes: 605 US3 03 Bright Brass, 606 US4 04 Satin Brass, 612 US10 10 Satin Bronze, 613 US10B 10B Dark Oxide Bronze,Oil Rubbed, 625 US26 26 Bright Chromium Plated and 626 US26D 26D Satin Chromium Plated
Additional Information
Additional Information
| Manufacturer | Arrow Lock And Door Hardware |
|---|---|
| Model | ML33SR-IC |
| Lock Functions | ML33 - Asylum - Dead locking latch bolt operated by key in lever, from either side. Both levers always inoperable |
| Door Thickness | 1-3/8" (34.92mm) to 1-3/4" (44.45mm) standard |
| Backset | 2-3/4" (69.85 mm) backset standard |
| Case | Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision zinc die cast. Extended one piece bearing sleeve offers added support for interlocking stainless steel tubes and provides for extra lever rigidity. Requires standard 2-1/8" (53.97mm) bore through door |
| Handing | Non-Handed |
| Keying/Keyways | Lockset prepared to use with 6 or 7pin interchangeable core. Supplied less core, but packed with tailpiece. Will also accept cores manufactured by Best™, Falcon™, Medeco Keymark™, ASSA™, and others |
| Latchbolt | Brass, bronze or stainless steel. 2-1/4" (57.15mm) x 1-1/8" (28.57mm). Available with 1" (25.4mm) front latch for 2-3/8" (60.32mm) backset or 1" front for 2-3/4" (69.85mm) backset |
| Exposed Trim | Levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks |
| Roses | Contain coil spring which is a permanent assembly within rose insert. The inside insert has graduating steps in two locations to prevent rose scalp from loosening. A “catch” on the outside insert prevents rose scalp from working itself loose during installation. |
| Strikes | Brass, bronze or stainless steel. ANSI A115.2, 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm) curved lip |
| Certifications | ANSI/BHMA A156.2, Series 4000, Grade 2 |
| U.L. Listed | Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors. Federal Specification FF-H-106C ANSI A117.1 Accessibility Code California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface. |
| Warranty | Limited three year warranty |
| Weight | 6.0000 |
Reviews
Write Your Own Review
Product Tags
Product Questions
Questions on Arrow ML33SR-IC Asylum Cylindrical Lever w/ SFIC (Less Core)
No questions asked yet
Ask Your Own Question
Product Downloads
 |
Arrow ML Series Specification Sheet (Size: 557.7 KB) |
