(800) 825-7848

You have no items in your shopping cart.

Altronix AL600ULM Multi-Output Power Supply/ChargerAltronix AL600ULM Multi-Output Power Supply/Charger
Move your mouse over image or click to enlarge

Altronix AL600ULM Multi-Output Power Supply/Charger

Be the first to review this product

AL600ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.

Availability: In stock


Free Ground Shipping on domestic orders over $200

Priority orders placed before 12PM PST will be shipped the same day. Standard orders will be shipped within 24 hours.

Most items (excluding special orders) can be returned or exchanged within 30 days. Please see our Return Policy for more details.

Have Questions? Chat with us at the bottom of the screen or call us at (888) 209-8167

Product Description


• Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
• Five (5) PTC protected Class 2 Rated power limited outputs, rated @ 2 amp.
• Output relay energizes when unit is triggered (form “C” contact rated 1 amp @ 28VDC).
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Maximum charge current 0.7 amp.
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• Power fail supervision relay (form “C” contacts).
• AC input and DC output LED indicators (power supply board).
• Red LEDs indicate condition of power outputs (multi-output board).
• Power & input trigger LEDs (multi-output board).
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 36.85 BTU/Hr.
- 24VDC: 73.7 BTU/Hr.
• System AC input VA requirement: 402.5VA.

Additional Information

Additional Information

Manufacturer Altronix
Model AL600ULM
Dimensions Enclosure Dimensions (H x W x D approx.): 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
Accommodates up to two (2) 12VDC/7AH batteries
Outputs Selectable 24VDC or 12VDC
Input Voltage Input 115VAC, 60Hz, 3.5 amp. - Input fuse rated @ 3.5 amp/250V
Output Voltage 12VDC or 24VDC selectable outputs
Output Current (AMPS) 6 amp supply current
U.L. Listed UL 294 UL Listed for Access Control System Units
UL 1481 UL Listed Standard for Safety for Fire Protective Signaling Systems
CA State Fire Marshal CSFM - California State Fire Marshal Approved
NYC MEA MEA - NYC Department of Buildings Approved
Warranty Lifetime Warranty
Weight 10.0000


Write Your Own Review

You're reviewing: Altronix AL600ULM Multi-Output Power Supply/Charger

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

Questions on Altronix AL600ULM Multi-Output Power Supply/Charger

No questions asked yet

Ask Your Own Question