Adams Rite 4781-021 Two-Point Deadlatch With Paddle For Aluminum Stile Doors (Push To Left)

• Bottom bolt is stainless hexagonal steel bolt requires only a 1/2" diameter hole in threshold for a strike
• Outside Operation: If key entry operation is required, any standard mortise cylinder with MS cam can be installed through an 8650 cylinder escutheon. Any of the entry trim available with Adams Rite exit devices can also be specified, in version used for CVR devices
• Inside Operation: Push paddle to unblock top bolt and withdraw bottom bolt. continuing to push opens the door in a very natural, handicap-friendly motion. Paddle stroke is approximately 1-1/2" at extreme end. Rod adjustment allows paddle (centerline) to be mounted at any height from 30 to 44 inches above the finished floor
• Paddle Dogging: tuning hex screw in paddle escutcheon holds paddle down, leaving door free-swinging
• Door Size: Standard unit will fit doors up to 66" above the paddle height (110" door if paddle is at maximum 44" height).
• For taller doors, order 8655 Tall Door Kit, which allows up to 97" above paddle
• Top bolt is similar to door latches on some automobiles and aircraft, the U-shaped bolt wraps around the strike post to deadlock position, which also deadlocks the bottom bolt through a gear train at the center of the rod assembly
• Header strike is a flanged post installed on the header has a generous location adjustment to allow for door misalignment, sag bumpers, etc. Designed to prevent forced entry by bowing the door
• Individually boxed with mounting screws and installation instructions
• Finishes: Clear Anodized 628, Dark Bronze Anodized 313 and Black Anodized 335